New Tool: ProSource
Checkout our packaging and processing solutions finder, ProSource.
Start Your Search

Heat and Control: Slicer infeed conveyor

Heat and Control has released the FastLane slicer infeed conveyor; slicer infeed conveyors reduce plugging risk and amounts of slicing scrap, while improving slice quality—and have helped many potato processors optimize quality with quantity.

Slicer infeed conveyor
Slicer infeed conveyor

However, some potato processors are unable to use slicer infeed conveyors due to factory space and cost limitations. In response, Heat and Control created the space-saving FastLane, which combines gentle horizontal motion with a multi-lane pan that singulates product for delivery into multiple rotary slicers. This ensures that only available slicers receive successive product while unavailable slicers remain unfed.

The FastLane eliminates hazardous pinch-points by using basal-mounted, air-actuated paddles which use upward motion to dam lanes and which descend without a mechanically applied force.

Overhead paddles are a sanitation hazard because debris can accumulate on the paddles or on any suspended support steel and can fall into the product stream. With the innovative FastLane control interface, an operator can push a button to select an air-actuated paddle which rises to impede product stream within the lane. It also eliminates overhead sources of contamination which can fall into the product stream.

The FastLane is built for washdown environments and simple sanitation. The stainless steel totally enclosed, fan-cooled motor package is IP65-rated, and the electrical cabinet and sensors are IP66 rated and designed to NEMA 4X standards.

The FastLane increases production by yielding more quality slices and less scrap with a consistent, singulated feed to each slicer. It spreads potatoes evenly so there is no flooding or product damage. The unit requires less floor space and saves up to half the total cost of traditional infeed conveyors, so additional equipment can be added in the same area when needed.

The maximum operating speed is 60 Hz (0.75 kW motor) or 53 Hz (1.55 kW motor). The maximum throughput is 38,400 lbs./hr. (17,418 kg/hr.) and the maximum pan weight is 300 or 400 lbs. (136 or 181 kg), depending on motor size.


Fill out the form below to request more information about Heat and Control: Slicer infeed conveyor
Test Your Smarts
Take Packaging World's sustainability quiz to prove your knowledge!
Take Quiz
Test Your Smarts
Discover Our Content Hub
Access Packaging World's free educational content library!
Unlock Learning Here
Discover Our Content Hub