AutomationDirect: Integrated stepper motors and drives

AutomationDirect adds Integrated motors and drives to its SureStep line of stepper motion control products. Units provide accurate micro-stepping position and speed control for smooth motion and step response and require only two components, power supply, and integrated stepper motor/drive.

Aug 14th, 2018
SureStep
SureStep

Standard motor/drives and Advanced motor/drives are available. Existing SureStep systems require four components including power supply, stepper drive, motor extension cable, and motor.

SureStep advanced integrated motor/drives have available torque from 54 to 340 oz-in and software-selectable resolutions ranging from 200 steps per revolution. The advanced drives can operate with traditional high-speed inputs, but can also be commanded via 0–5V analog input. An internal indexer can accomplish point-to-point moves controlled via ASCII communication.

Free SureMotion Pro drive configuration software is available for Advanced integrated motor/drives (not required for Standard drives) to easily configure and setup the drive, including drive, motion control mode, I/O, and motor. A Status Monitor screen aids in troubleshooting alarms and faults.

SureStep integrated motor/drives start at $97.

Companies in this article
AutomationDirect
Multi Conveyor Elevated Conveyor System
Elevated Conveyor System Provides Uninterrupted Production Below
Maximizes floor space and production
Jun 2nd, 2020
The advanced Interroll conveyor system at Cookplus is entirely managed by software developed by Teknokom.
Automated Material Flow System for E-comm Center
A fully automated and remotely monitored material flow system is part of a modern, 6,000-square-meter distribution center of Cookplus in Hadimköy near Istanbul, Turkey.
Jun 2nd, 2020
Electronic position indicators simplify size changeovers. The status LEDs light up green when the actual and target values match precisely.
Position Indicators Speed Changeover
Three packaging machines handling powdered milk formula rely on monitored size changeover using electronic position indicators with IO-Link interface.
Jun 2nd, 2020
Gr Scms 150 Vr3
Smart Condition Monitoring of Gear Drives
Rexnord Series 1000 Smart Condition Monitoring System, power by DiRXN, brings proven maintenance savings, increased uptime, and enhanced safety.
Jun 2nd, 2020
Pressure Feedback Pmdcorp
World's First Outer Loop Control IC Released For Brushless DC and DC Brush Motors
Juno Outer Loop Control IC integrates a novel outer loop control function with velocity control and current control functions for 3-phase Brushless DC and DC Brush motors.
May 27th, 2020
Cp2 E Image
All-in-One Controller
Omron releases the CP2E Series all-in-one controller for compact IoT applications. Unit features an extended temperature range that integrates I/O ports, communication, and motion control and increases reliability in a variety of applications.
May 22nd, 2020
Cognex
Inline Barcode Verifier
The DataMan 475 inline barcode verifier from Cognex provides automated high-speed verification and quality reporting for 1D, 2D, and direct part mark (DPM) codes.
May 22nd, 2020
Grm0 Micro Clamps
Sheet Metal Handling Clamps
PHD launches the Series GRM0 Micro Clamps of sheet metal handling clamps designed for high clamp force in an extremely compact package.
May 21st, 2020
Matrox Altiz
3D Profile Sensors
Matrox Imaging launches the Matrox AltiZ series of integrated high-fidelity 3D profile sensors featuring a dual-camera single-laser design.
May 20th, 2020
Im2020020172 Di
Weighing Module
The Siwarex WP351 module is Siemens’ newest solution for intelligent weighing automation for a wide range of applications in pharmaceutical, food and beverage, chemical, and steel industries.
May 20th, 2020
Wago
Power Supplies Units
Wago’s Pro2 power supplies units include six sizes ranging from 120 to 960 W with an energy conversion efficiency up to 96%.
May 18th, 2020
Im0084303
Thermal Flowmeter Sensor
Sick announces the FTMg multifunctional thermal flowmeter sensor for the detection of gas flow, temperature, and process pressure.
May 15th, 2020
The highly compact XTS has a circumferential track length of 22 m and uses a total of 40 independent movers. The L’Oréal Group produces high-quality skin care products, mascaras, and foundation makeup for its Division Luxe.
L’Oréal Replaces 5 Machines with One Smart System
Facing SKU proliferation and shorter runs, the L’Oreal Group replaced an outdated system with a new track-based system of movers that brings fast changeover and high output.
May 12th, 2020
Torque Limiter Sprocket
Pre-assembled Torque Limiter Sprockets
U.S. Tsubaki launches the torque limiter sprocket, a complete assembly providing both a torque limiter and sprocket together as one unit.
May 12th, 2020
1 2ndxt Pr Ppe Clean 559x
No-Drip Spray Nozzles
Exair’s new 1/2 NPT no drip external mix air atomizing spray nozzles are designed to stop liquid flow when compressed air is shut off.
May 7th, 2020
Robot Control Mate
SCARA Robot Control
ABB’s RobotStudio’s new Robot Control Mate add-on allows users to easily commission and control SCARA robots direct from their laptop and computers.
May 1st, 2020
Tekscan
Pressure-Mapping Module
Tekscan introduces the PM64™, a customizable pressure-mapping scanning electronics module with an incremental pricing model that supports a large-scale deployment for high-volume users and OEMs.
Apr 29th, 2020
Checkpoint2
Occupancy Counting Sensor
Checkpoint Systems, a division of CCL Industries, launches SmartOccupancy, a solution designed to help companies view area occupancy levels and receive alerts in real-time.
Apr 29th, 2020
Pr Pcmc Smart Touch 042720 Final Web 3
HMI Solution
Paper Converting Machine Co., part of Barry-Wehmiller, launches Smart TOUCH HMI a new human-machine interface available on Forte tissue converting lines.
Apr 29th, 2020
Prosense Protection Relays 5x7
Motor Control and Intrinsically Safe Relays
AutomationDirect offers ProSense motor control relays that perform specific protective functions for motors or motor components, and the Macromatic intrinsically safe relays that provide safe and reliable control of loads within hazardous locations.
Apr 28th, 2020
More in Controls & automation
Fa20001 Rexroth Im Scompact Image
Integrated Measuring System
With its sensor system integrated in the ball runner block, Bosch Rexroth’s new IMScompact integrated measuring system determines the exact position with a high repetition accuracy of ±1 μm.
Apr 27th, 2020
Ei3 400x400
ei3 Acquires NextIOT
ei3 completed its acquisition of Copenhagen-based NextIOT. NextIOT is being renamed ei3 Denmark ApS and will join ei3’s existing Switzerland-based data science team as ei3’s European operations.
Apr 27th, 2020
Jw Winco Canada 4 7 2020
JW Winco Opens Branch Office in Canada
JW Winco, a supplier of standard industrial machine components, recently opened a branch and distribution center in Canada.
Apr 24th, 2020
2004np Emerson
Modular Industrial Displays Minimize Lifecycle Cost
RXi modular industrial displays and panel PC products from Emerson provide high performance even in harsh and difficult operating environments.
Apr 23rd, 2020
Fady Saad (left), MassRobotics Co-founder, receives the Festo delivery of a Rize 3D printer for the MassRobotics Shared Labs from Festo Senior Product Manager Nuzha Yakoob.
Festo and MassRobotics Create Partnership
Festo entered into a strategic partnership with MassRobotics to further global market growth and innovation initiatives dedicated to the development of the next generation of robotics.
Apr 23rd, 2020
Cognex In Sight D900
Industrial Smart Camera
Cognex introduces the In-Sight® D900 self-contained embedded vision system designed to solve a broad range of complex in-line inspection applications including optical character recognition, assembly verification, and defect detection.
Apr 23rd, 2020
Cc318 S Sw Etc 559w
Cabinet Cooler Systems
Exair's new Dual 316 Stainless Steel Cabinet Cooler Systems with ETC keep electrical enclosures cool with 20°F (-7°C) air while maintaining the NEMA 4X rating of the enclosure and removing the heat that could adversely affect the internal components.
Apr 22nd, 2020
Eagle Epx100 X Ray System
X-ray System Helps Food and Beverage Companies Optimize Production Efficiencies
Improves the sustainability of operations and quality of products while saving energy
Apr 20th, 2020
Hc20 Xp Robot
Collaborative Robot
Yaskawa Motoman launches the 20 kg payload HC20XP collaborative robot suitable for applications where robots need to safely work with, or in close proximity to humans.
Apr 17th, 2020
Sitma We Care
Sitma Launches “We Care” Program
Sitma Machinery launches 'We Care,' a customer-assistance program based on advanced strategies to allow both predictive and remote work on machines and systems.
Apr 15th, 2020
2020 04 Aisi 316 L A4 Stainless Steel
Corrosion Resistant Machine Components
JW Winco expanded its line of stainless steel machine components to include components available in AISI 316L (4), a higher grade stainless steel.
Apr 15th, 2020
Gefran Linear Potentiometers 5x7
Linear Position Potentiometers
AutomationDirect’s Gefran linear potentiometers can be used to detect position and linear direction movement.
Apr 14th, 2020