Inverter-fed motors

Baldor Electric Co. (Fort Smith, AK) introduces a new 14-page technical handbook on the fundamentals of inverter-fed motors. Topics include how inverters affect motors, typical types of motor problems caused by inverters, suggested solutions to these and other problems, application engineering, motor selection and how to properly adjust inverter operating limits.

Jun 30th, 1996
Companies in this article
ABB Motors & Mechanical
Videos from ABB Motors & MechanicalView all videos
Dodge Food Safe bearings - IP69 rated for unprecedented performance in food applications
Dodge Food Safe bearings - IP69 rated for unprecedented performance in food applications
Jul 13th, 2020
EC Titanium – IE5 efficiency through an integrated motor drive solution
EC Titanium – IE5 efficiency through an integrated motor drive solution
Jul 6th, 2020
Dodge Torque-Arm II belt guard - Enhanced safety features
Dodge Torque-Arm II belt guard - Enhanced safety features
Jun 22nd, 2020
Dr Karl Weber
Beckhoff Employee Appointed to IEEE Committee
Beckhoff's Dr. Karl Weber is the first representative from EU appointed to the IEEE Committee. He will represent the German Federal Ministry in the international Government Engagement Program on Standards
Aug 6th, 2020
Mi Hq Logo Horiz Sm
Motion Industries Announces Two Acquisitions
Motion Industries, Inc., entered into agreements to acquire TRC Hydraulics, a Canadian-based supplier of hydraulic products and services, and F&L Industrial Solutions, Inc., a distributor of T-slotted aluminum extrusion components.
Aug 3rd, 2020
Dfa90 L Dfa90 S Dfa68 M
Rotor Motors
Nanotec expands its line of BLDC motors with the DFA90 external rotor motor with a rated power of up to 170 W and a diameter of 90 mm.
Aug 3rd, 2020
From left: Ayla, Dr.-Ing. Karl, Sami, Ayhan, and Kaya Busch
Busch Vacuum Solutions Named Germany's Top Family Business
Busch Vacuum Solutions was named one of Germany's Top Family Business for 2020 by German Business Magazine Wirtschaftswoche.
Jul 31st, 2020
Design Assistant X 2006
Matrox Imaging Announces Software Update
Matrox Imaging announces an update to Matrox Design Assistant® X, the flowchart-based vision software. It now offers additional 3D camera interfaces, expanded image classification using deep learning, acquisition from CoaXPress cameras, and more.
Jul 30th, 2020
Oan Fallas Speedybot
End-of-line Specialist Moves Toward Condition Monitoring
Fallas Automation places an even greater emphasis on integrating early warning systems for predictive maintenance since COVID-19 set in.
Jul 30th, 2020
Stellar Sr35 Soft Starters 5x7
Single- and Three-Phase Soft Starters
AutomationDirect’s Stellar SR35 series solid-state soft starters are available in three frame sizes to control both 1-phase and 3-phase AC induction motors with 24 VDC control voltage (optional 110-230 VAC).
Jul 29th, 2020
Fanuc
Fanuc Named GM 2019 Supplier of the Year
Fanuc was named Supplier of the Year by General Motors. This is the 16th time Fanuc has received the award.
Jul 27th, 2020
Thk
Caged Ball Linear Motion Guide
THK America launches the Type SPR/SPS Caged Ball LM Guide featuring additional raceway grooves, ultra-long blocks and an increased number of small-diameter balls.
Jul 17th, 2020
Allied Full Color Logo 2018 Web
Allied Electronics & Automation Adds New Product Lines
As part of the continuous expansion of its range of ready-to-ship products, Allied Electronics & Automation is adding product lines from RichTech, StarTech.com, Schmersal, Klüber Lubrication and OkDo.
Jul 17th, 2020
Sick1 5e8c9bf13a5e0
Sick’s Laser Scanner Receives Robotics Innovation Award
Sick, Inc. was awarded a Robotics Innovation Award from the Robotics Business Review for its nanoScan3 safety laser scanner.
Jul 16th, 2020
Screen Shot 2020 07 15 At 1 33 14 Pm
Vision Inspection Maximizes Label Accuracy
For one North American food manufacturer, Omron’s SKU verification system dramatically lowered production costs and increased overall profitability.
Jul 15th, 2020
Hank Lee Beckhoff Automation Edited 1
Beckhoff USA Appoints West Region District Manager
Hank Lee was hired as West Region District Manager for Beckhoff Automation USA.
Jul 10th, 2020
Condition Monitoring Sensor
Condition Monitoring Sensor
Balluff’s condition monitoring sensor can measure vibration, temperature, relative humidity, and ambient pressure. It collects and processes these readings and outputs digital statistical data to a host system via IO-Link.
Jul 9th, 2020
Jw W Inco 2020 07 Assembly Pins Gn 2342 2344 1024
Assembly Pins
JW Winco’s stainless steel assembly pins from the GN 2342 series are available in diameters from 8 to 20 millimeters and in various standardized lengths.
Jul 8th, 2020
Ph compass 02
Yaskawa America Introduces Yaskawa Compass Software
Intuitive software tool for advanced manufacturing.
Jul 8th, 2020
4-day live virtual event, presented by Bosch Rexroth.
Bosch Rexroth Hosts Free Virtual Event
Bosch Rexroth will host a free 4-day virtual event July 13-16 that will discuss the Factory of the Future.
Jul 7th, 2020
28760 Tm5 Cylinder
Aluminum Pneumatic Cylinder
Emerson Industrial Automation offers the Aventics TM5 TaskMaster aluminum pneumatic cylinder designed to increase reliability and productivity and reduce vibration and noise.
Jul 6th, 2020
Image001
ACC Announces Smart Start Program
Automated Control Concepts (ACC) announces a new initiative—Smart Start—designed to help manufacturers begin the journey to digital transformation and information-based decision-making.
Jun 30th, 2020
2020 06 Hinges With Spring Loaded Return Gn 233 3
Hinge Automatically Opens And Closes Doors
Jun 17th, 2020
More in Controls & automation
Psdfm 559x
Pressure Sensing Digital Flowmeters
Measuring compressed air is the first step toward identifying high compressed air use areas, compressed air leaks, and optimizing air use.
Jun 12th, 2020
Sickimage
Sick Launches Software Development Platform
Sick launches the AppSpace Ecosystem a software development platform designed to enable users to customize 2D and 3D vision solutions.
Jun 26th, 2020
28446 Bild 1 Drt
Dynamic Reference Diffuse Sensor
The DRT 25C dynamic reference diffuse sensor from Leuze is ideal for confectionery and baked goods packaging machinery. It works with three light spots and uses reference technology. It can detect objects with different shapes and surfaces.
Jun 24th, 2020
Matrox Rapixo Cl Pro 650px
Frame Grabbers
Matrox Imaging adds the Matrox Rapixo CL Pro to its Matrox Rapixo series of frame grabbers.
Jun 23rd, 2020
Exair
Cabinet Coolers
Exair’s cabinet coolers stop electronic control downtime due to heat, dirt, and moisture. They are designed to cool and purge NEMA 4, 4X and 12 electronic control panels. Newer models are available for NEMA 4 and 4X hazardous locations.
Jun 23rd, 2020
Antares Vision Headquarter
Antares Vision Partners with IMA Group
Antares entered into a five-year agreement with IMA whereby it becomes the exclusive supplier of all IMA inspection and tracking technologies.
Jun 18th, 2020
KEB’s EtherNet/IP™ S6/F6 products are ODVA certified.
KEB America Introduces EtherNet/IP for S6 and F6 Drives
EtherNetIP is now available for the S6 and F6 variable-frequency drives from KEB America.
Jun 16th, 2020
Via System Overview
Neurala Announces VIA Software to Help Manufacturers Improve Quality Inspection
Neurala, an AI software company, launches its VIA (Vision Inspection Automation) software: an integrated solution to help manufacturers improve quality inspection on the production line while scaling to meet product demands.
Jun 15th, 2020
Txm24 Dual Port
Encoders
Applied Motion Products offers a series of integrated motors featuring multi-turn TruCount™ absolute encoders that do not require batteries or external power to track position when the motor is powered off.
Jun 15th, 2020
32755672 640x640
RōBEX Named Certified System Integrator for MiR
RōBEX LLC announced it achieved certified system integrator status for MiR Robots Americas Inc., becoming only the fourth Certified System Integrator for MiR in North America.
Jun 10th, 2020
Mettler Toledo C33 PlusLine Washdown Checkweigher
Mettler-Toledo Unveils Two Checkweighers During Virtual Trade Show
During a virtual trade show last week, the company debuted machinery built for easy cleaning in harsh manufacturing environments.
Jun 10th, 2020
Bosch Rexroth’s ctrlX Automation platform features open software architecture, a wide choice of programming language options, and app-based functionality.
Bosch Rexroth Reinvents Its Automation Approach
The automation supplier went back to the drawing board to create ctrlX Automation, a software-driven open automation platform that provides flexibility and scalability through app-based functionality.
Jun 4th, 2020