Multiuser-capable HMI/SCADA

The new zenOn 6.20 Editor from Copa-Data is thoroughly multiuser-capable, allowing for simultaneous project creation. Projects can be saved on a central computer and then edited simultaneously from different workstations, allowing a team of development engineers to distribute project work optimally.

Jul 31st, 2005

Also features an intelligent administration system so that there are no overlaps during joint configuration. Each element (variable, image, etc.) currently being processed is marked so that no other team member can change the same element at the same time. Offline mode allows for decoupling entire projects from the central computer for editing offline. Also provides modification history.

Ap10 2 Layer Cmyk Io Link

Electronic Position Indicator

SIKO’s AP10 IO-Link electronic position indicator with communication interface is used for monitored format adjustment to reduce setup times and increase machine efficiency.

Screen Shot 2021 10 04 At 8 53 49 Am

Festo Integrates Electric Automation and Pneumatics

At PACK EXPO Las Vegas 2021, Festo showcased its new Simplified Motion Series combining pneumatics and electric automation along with its new gripper technologies.

Regal Rexnord Powertrain Brands

Regal Beloit Completes Merger with Rexnord PMC Creating Regal Rexnord Corp.

The new company will bring an expanded range of product and digital solutions aimed at helping increase customers’ efficiency and productivity.

Colgate-Palmolive is a caring, innovative growth company that’s reimagining a healthier future for all people, their pets, and our planet.

Air Flow Monitoring Supports Colgate-Palmolive’s Sustainability Initiatives

IIOT-enabled flow sensor helps consumer products company reduce the wasted energy from its pneumatic systems.

Measuring Wheel Encoder

Posital Fraba Exhibits Cube and Measuring Wheel Incremental Encoders

The company’s incremental encoders provide accurate measurements for highly precise motion control applications.

Handled with care: Your cookies and crackers deserve the best!

Handled with care: Your cookies and crackers deserve the best!

They are a delight around the world – and a challenge for manufacturers everywhere. The guide provides an analysis of the market trends and the corresponding requirements focusing on handling and infeed technology.

Web Image 5fa5df7e20d64

Seal Integrity Tester from Teledyne

The in-filler technology allows for automated inspection of lids to ensure they are properly sealed.

Getty Images 1268601565

Siemens Emphasizes Cybersecurity and Real-Time Location at PACK EXPO

Cybersecurity and real-time location technologies are being exhibited by Siemens alongside its stainless steel motor, robotics controller, and digital thread technologies.

Screen Shot 2021 09 29 At 11 32 19 Am

Augmented Reality Speeds Machine Troubleshooting

Emerson’s new Augmented Reality option runs on its Movicon SCADA platform and allows operators to control equipment through an iPad or AR device and gather metrics on the machinery.

Beckhoff highlights XPlanar’s no contamination through contract-free and wear-free movement.

Beckhoff Highlights Futuristic Materials Handling and Software Updates

From additional hygienic and washdown capabilities in its XPlanar and XTS technologies to new TwinCAT integration packages and I/O safety features, Beckhoff Automation brings an array of cutting-edge automation products to PACK EXPO Las Vegas.

Ae21003 Rexroth Ctrl X Store Image

Bosch Rexroth’s CtrlX Store Brings 'Smartphone Principle' to Industrial IT

The new marketplace allows turnkey applications to be installed on any CtrlX CORE unit.

Handled with care: Your cookies and crackers deserve the best!

Handled with care: Your cookies and crackers deserve the best!

They are a delight around the world – and a challenge for manufacturers everywhere. The guide provides an analysis of the market trends and the corresponding requirements focusing on handling and infeed technology.

Screen Shot 2021 09 28 At 1 11 35 Pm

Custom Designs Delivered by Multi-Conveyor

Custom conveyor house demonstrates the range of conveying technologies it offers, including its new slim-fit, low-profile, sanitary and hygienic conveyor belt.

Nord Gear’s Nordac On and On+ VFDs feature plug-and-play capability for ease of internet-based networking and feature integrated industrial Ethernet interfaces that are switchable for use with Profinet, EtherCAT, and EtherNet/IP.

Nord Gear Introduces New Drive and Motor Systems

The forthcoming DuoDrive integrated geared motor and Nordac On and On+ drive systems are designed for intralogistics as well as food and pharmaceutical industry production applications.

Siemens Simotics S 1 Fs2 Stainless Steel Motor

Servomotors

Siemens introduces the SIMOTICS S-1FS2 line of servomotors designed for the clean condition requirements of the food, beverage, sterile packaging, pharmaceutical, and other process industries.

Lenze Autotuning Pelv2021

Automating Drive Optimization

Lenze introduces auto-tuning, a fast and easy way to optimize the control loop in a drive during commissioning.

Oriental Motors Showcases Alphastep Hybrid Control System

The unique positioning system uses a fusion of open- and closed-loop control.

Getty Images 1221937566

Rockwell Showcases FactoryTalk Software, Unified Robot Control

IT/OT convergence and digital transformation are the topics dominating Rockwell’s booth this year.

Vdg Intelli Drive Drum Motor

Drum Motor Has Permanent Magnet Electric Motor Technology

Is built for reliability, efficiency, and longevity

Festo’s SMS combines pneumatics with electric automation for use in positioning, indexing, clamping, feeding, and cut-to-length tasks.

Festo Bridges Pneumatics and Servo Motion

The company’s new Simplified Motion Series adds IO-Link connectivity to make positioning, indexing, clamping, feeding, and cut-to-length tasks more cost effective than traditional all-servo motion systems.

More in Controls & automation

This screen save shows how customers using Llumin software can know the status of specific pieces of equipment in real time no matter where they are located.

CMMS Specifically for OEMs

Exhibiting for the first time at PACK EXPO, Llumin, an established participant in the Computerized Maintenance Management System (CMMS) space, introduced a new software called Llumin for OEMs.

Beckhoff Orlando Office

Beckhoff USA Opens Florida Office

The Orlando facility will boost sales and engineering support for a wide range of industries with a special focus on entertainment applications.

Press Photo Posital Encoders+wheels

Posital to Showcase Programmable Position Sensors/Encoders at PACK EXPO Las Vegas

See it at PACK EXPO Las Vegas Booth #SL-6358! Posital will showcase its programmable position sensors/encoders designed to provide cost-efficient versatility for packaging applications.

Image 3 Gawis User Interface

Measurement Testing System for Plastic Containers

Agr International’s Gawis 4D™ measurement testing system is designed to automate a number of critical bottle and preform measurements into a single operation.

The IP65/67-rated C7015 ultra-compact Industrial PC (left) supports machine mounting even in confined spaces and further minimizes footprint with directly attached EPP series EtherCAT P I/O modules (as shown on the right).

Beckhoff C7015 Industrial PC Provides IP65/67 Rating in Compact Form Factor

The powerful edge device integrates space-saving, fanless machine control directly into harsh production environments.

Allpax Digital Chart Recorder Front Historical Large Angled (003)[2]

Allpax to Debut Digital Chart Recorder at PACK EXPO Las Vegas

See it at PACK EXPO Las Vegas Booth #C-3429! Allpax will debut its solid-state digital chart recorder that offers data recording and data integrity benefits and eliminates deviations common to paper charts.

Eagle Product Inspection

X-ray Inspection Software

Eagle Product Inspection’s TraceServer™ software captures and records production data at every pass, connects up to 32 x-ray inspection machines at once, and consolidates information and images into an easily-accessible centralized database.

U Si Safety Sensor Hi Res 300x214

Ultrasonic Sensor

Pepperl+Fuchs’ 2-channel USi-ultrasonic sensor is suitable for use in harsh environments and as well as outdoor applications.

The Varioline packaging system works with ten robots, distributed among four modules, which enables the machine to handle a total of 18 different packaging variants.

Mastering Complex Production Sequences

This middle-tier German beer producer offers some 25 varieties of beer in returnable glass bottles, so it needed a highly versatile and automated controls architecture.

NCC Automated Systems has been acquired by ATS Automation

NCC Automated Systems Accelerates Growth Potential via Acquisition by ATS Automation

NCC Automated Systems announced today that it has been acquired by ATS Automation Tooling Systems Inc., an industry-leading automation solutions provider to many of the world’s most successful companies.

XTS greatly reduces jams and downtime as it moves perfectly stacked pizzas into cases. Shown here is a freshly erected case on the right and two stacks of pizzas about to be pushed into the case on the left.

Flexibility, High Throughput on Pizza Case Packer

The M2000 case packer does the work of three machines, erases downtime and excess mechanical parts, and delivers big on flexibility and throughput.

Level Transmitter

Emerson’s Rosemount 1408H non-contacting radar level transmitter is designed specifically for food and beverage applications with IO-Link connectivity.