New Tool: ProSource
Check out our packaging and processing solutions finder, ProSource.

The case for degradability’s place alongside the three Rs

Single-use plastics and plastic packaging are under increasing pressure today, as evidenced by the growing number of taxes or outright bans on everything from plastic bags to drinking straws.

Lawrence Dull
Lawrence Dull

Conventional wisdom has said the answer to our waste problem is re-use and recycling—creating the so-called “circular economy.” While this solution will go a long way toward helping our plastic waste challenge, it is not the whole solution.

Plastic packaging is being improperly disposed of (ocean plastic), current landfills are reaching capacity, and very few new landfills are being opened. Incineration for energy recovery is environmentally acceptable; however, toxic emissions from some polymers (particularly PVC) are an issue—dioxins and/or hydrochloric acid may be produced.

So, what can we as packaging engineers do to design more sustainable packaging? We can take weight out of our packaging (light-weighting), we can make our packaging reusable, or we can make our packaging easily recyclable. These are the familiar three Rs—reduce, reuse, recycle. I would argue that an additional consideration should enter into this discussion—degradability.

Reliance on nature
A challenge with recycling is that it must make economic sense. That is, the costs (and confusion) associated with collecting, sorting, cleaning, and reprocessing plastic packaging cannot exceed the cost of using virgin materials. Some companies might accept a slightly negative economic benefit if there is positive environmental benefit, but at most companies, economics is paramount. Post-consumer recycling of polymeric packaging materials can work well if the polymers can be separated and recovered cost-effectively. This is becoming somewhat problematic in today’s marketplace given China’s recent constraints on the importation of recycled polymeric materials.

Biodegradation, on the other hand, relies on nature’s built-in capacity to recycle. Polymers can be degradable in two ways—photodegradable or biodegradable. One definition of biodegradable polymers includes the requirement that the primary degradation mechanism is the result of the action and metabolism of microorganisms. Biodegradation can take place in either aerobic or anaerobic environments.

I first started working with a novel polymer in the late 1980s that sidesteps the traditional waste stream and recycling issues because it dissolves in water and biodegrades. It’s worth revisiting that work today to see if it might spark new innovations that might help solve some of our current waste challenges.

The case for PVOH
Polyvinyl alcohol (PVOH) is a material that has been used in many applications for almost 100 years. Many packaging engineers will recognize it as the polymer used in films for the detergent “pods” that have become so popular in recent years. What fewer people might know, however, is that more than 30 years ago a handful of packaging engineers also created bottles, string, fibers, non-wovens, and a host of other functional materials from PVOH.

Do biodegradable materials make sense as a part of today’s environmental discussion? I think they do. Furthermore, I think packaging engineers and product designers should add PVOH to their toolbox of materials when designing environmentally responsible products and packaging.

For consumer products such as household detergents, OECD 301 and 302 test procedures have gained wide acceptability as standard test methods to characterize the biodegradability of water-soluble films based on polymers such as PVOH in the aerobic wastewater environment. Research has indicated that PVOH is biodegraded by more than 55 species of microorganisms, many of which commonly found in municipal and industrial wastewater treatment systems.

Studies have also shown that PVOH, in combination with other synthetic and/or natural materials, is biodegradable. In fact, the degradation mechanisms for PVOH have been fully studied and the pathway has been established as: first, random chain scission of the polymer molecule to acetic acid; and second, the oxidation of the acetic acid to carbon dioxide and water. It is thus obvious that the final biodegradation products of PVOH are very innocuous compounds.

Even as improvements are made to global recycling systems, packaging engineers should be aware of the advantageous properties of PVOH as a packaging material—water solubility and biodegradability—and include it in their list of possible materials when designing new packaging systems. Recent years have seen the publication of more data concerning the carbon footprint of PVOH, so it is easier than ever to evaluate the environmental impacts of using this unique material. Moreover, advances in chemistry and manufacturing technologies likely have removed some of the price and technological barriers to fully commercializing some of those earlier innovations. The social and environmental urgency to bring such innovations to market is certainly now present in the marketplace as well.

Discover Our Content Hub
Access Packaging World's free educational content library!
Read More
Discover Our Content Hub
How Can You Honor a Leader?
Induction into the Packaging & Processing Hall of Fame is the highest honor in our industry. Submit your leader to be considered for the Class of 2024 now through June 10th. New members will be inducted at PACK EXPO International in Chicago
Read More
How Can You Honor a Leader?