WIP spray nozzles are now available for inclusion/retrofitting in new and existing piFLOW p conveying systems. The water sprayed by the WIP nozzles will wet any dust from food or pharmaceutical materials left in conveyors, stopping it from escaping into the air where it can be inhaled by processing staff during maintenance or cleaning procedures. By wetting potentially harmful leftover material before the equipment is opened for cleaning, the spray nozzles ensure that any such dust stays wet until it can be safely removed.
For maximum performance and coverage, and to make sure as much material as possible is captured as quickly as possible, up to three spray nozzles can be fitted to each conveyor. The configurable design of the conveyor also allows simple retrofitting of WIP units, including extra air filters, in existing conveying systems. Piab’s sterile Ultra Low Penetration Air (ULPA, class U15-17) filters provide greater filtration than High Efficiency Particulate Air (HEPA) filters, and are offered as standard accessories for piFLOW p.
The piFLOW p conveyor for powder and bulk materials is designed to perfectly match the stringent demands for operational safety and hygiene within the food and pharmaceutical industries. Made from materials that comply with the US FDA and EU 1935/2004 regulations, the conveyors can be used to safely transport large volumes of powder/bulk materials, and their advanced technology will guarantee segregation-free conveying. The piFLOW p is available in ATEX dust and gas approved designs, in which all plastic or rubber parts, including filters and seals, are made of antistatic nitrile butadiene rubber.