System Technology: 24-vDC power roller

24-v operation offers safety, quieter operation and lower operating costs. Unit offers variable speed from 20 to 190 ft./min., plug and play controls, fewer spare parts, andshort repair times—typically without an electrician.

1.9 in. roller features:

·Drive: 1.9 in. dia. powered rollers

·Motor: 24-vDC

·Controls: Drive cards and zone photo-eyes mounted under conveyor frame

·Speed: Variable from 20 to 190 ft./min.

·Bed: 18 in. wide roller bed with 1.9 in. dia. x 16 gauge galvanized steel rollers spaced on 3 in. centers with 7/16 in. hex, spring loaded axles, abec-1 bearings

·Supports: Floor or ceiling supported

·Guard rail: Angle type “A” (facing inward) both sides

·Zones: Up to 36 in. zone length on a single motor

·Finish: All normally painted parts are powder painted grey. Stainless steel option available.