New Tool: ProSource
Checkout our packaging and processing solutions finder, ProSource.

OMAC picks up speed

P&G, Hershey, M&M Mars indicate that OMAC involvement has already helped their bottom lines. Also, new PackML group formed to tackle naming convention guidelines for machine states.

Attendees included converters, packagers, converting machinery builders, packaging machinery builders and controls suppliers.
Attendees included converters, packagers, converting machinery builders, packaging machinery builders and controls suppliers.

As a result of their participation in the OMAC Motion for Packaging working group for the past two years, Hershey, M&M Mars and Procter & Gamble (P&G) have:

• lowered their packaging machine costs;

• observed smaller footprints on new machines;

• enjoyed a greater selection of packaging machines with open architecture controls;

• experienced more collaborative relationships with packaging machine builder vendors.

That’s according to engineers from those companies who spoke at an end-user panel at the most recent OMAC meeting held April 25 during the recent CMM (Converting Machinery & Materials) show in Chicago.

Also in the news: Building on previous momentum, a new subcommittee called PackML (Packaging Machine Language) was formed to develop naming convention guidelines for packaging machinery data communications. (More on this later.)

Benefits already apparent

Although the OMAC packaging working group has had some success over the past two years in terms of identifying common open architectures in packaging equipment, OMAC members would be the first to admit most of the hardest work still lies ahead.

Nevertheless, when asked during a panel discussion whether they’ve profited yet from their involvement with OMAC and the pursuit of open architecture controls over the last two years, engineers from Hershey, M&M Mars and Procter & Gamble were bullish.

“We’re seeing quotes from our key suppliers now using motion controls and other components that are much more open,” confirmed Gary Downey, Manager, Systems Engineering with Hershey Foods. “We are seeing a lower cost and smaller footprints, too.”

Bob Martell, motion control technology leader at P&G and chair of the OMAC packaging working group’s connectivity/architecture subcommittee, concurred. “In the past, if we wanted a standard that the OEM [the original equipment manufacturer, or machine builder] didn’t provide, it was quite an upcharge, because the OEM may not have had the resources [to accommodate the request],” explained Martell.

“They had to develop that expertise, and we would end up with a machine that probably didn’t run as well as with the proprietary controls offered by the vendor. So we ended up with a machine with higher cost, longer lead time and little support. Now with open architecture, [P&G and its machinery builder vendors] are all talking the same thing, so it’s reducing some of the other engineering we were paying for in the past,” Martell said.

P&G’s OMAC involvement is expected to reduce integration costs globally. With manufacturing operations in more than 70 countries, P&G’s global nature is also at the root of its involvement with OMAC, claimed Martell. “We buy machinery from OEMs all over the world, and we place them in plants all over the world. We want the assembly of packaging lines to happen in a seamless way. Open architecture is a way to do this. If we had to coordinate every OEM’s design, that adds a lot of cost and time into our development schedules. The demands of our market are to be faster, to bring products to market more quickly and at lower cost. Open architecture will help us this way.”

Finally, the evolution of the components themselves are contributing to reduced costs, according to Steve Ford, controls engineer with M&M Mars. “Control components have more functionality, so we don’t have to buy as many individual components now. We’re able to merge functions such as logic and motion control in the same control, and that reduces costs significantly.” [Editor’s note: For a survey on this trend, see PW, Feb. 01, p. 33, or www.packworld.com/ go/motionlogic.]

Vendors more collaborative

All three end-user panelists agreed that the open architecture dialogue created by OMAC has completely altered the dynamics of their relationships with machinery builders.

“One of the most revealing things for me and P&G is that there really are a lot of common needs among machine builders and end users,” said Martell. “Before, the relationship between the two was often fraught with conflict. We had our preferred platforms and the vendors had theirs. Open architecture has allowed us to collaborate [using a common control platform]”, Martell continued.

Hershey’s Downey concurred: “In OMAC, we’re discussing and sharing information with competitors, OEMs and technology suppliers that, in the past, we might not have. We’re doing that to try to make us all succeed better. There’s great potential here. The more people involved, the better.”

“In the beginning it seemed like a daunting task to get everyone to agree,” said Steve Ford of M&M Mars. “It seems amazing how quickly things are coming together.”

The pursuit of a common open architecture is yielding internal benefits at the panelists’ companies. That’s especially the case at Mars, well-known in engineering circles for its unusual decentralized engineering operations. “Since each site has its own engineering department, it’s difficult to maintain standards from site to site,” says Ford. “Open architecture helps promote standards within our own company.”

At Hershey, Downey has noticed an attitude change regarding electronic versus mechanical controls. “Our packaging engineers used to say, ‘Why do we need a servo?’ Now they say ‘Why doesn’t it have servo? Why this big frame? How are we going to get in there and work on it?’, etc.”

P&G views its participation in OMAC as a competitive advantage.

“I believe the directions we’re setting [via OMAC] are going to be the final outcomes for the industry,” declared Martell. “As we decide [OMAC’s] direction, we already have the inside track. It helps make our decisions a lot quicker. We know the direction of the technology months ahead of time versus waiting for an article in a publication to show up.”

PackML group formed

The other big news to come out of the April meeting was the formal kick-off of the PackML subcommittee. This group formed after a revelation at the previous OMAC meeting in February that defining standard machine states is key to interoperability on a packaging line. The PackML subcommittee is led by Fred Putnam, Ph.D., a consultant representing Markem Corp. Subcommittee members also include representatives from Hershey, Procter & Gamble, Unilever, Bosch Packaging, Elau, Indramat and Rockwell Automation.

The stated mission of the PackML group is to develop naming convention guidelines for packaging machinery data communications. The objectives are to collect—from users and suppliers—existing machine state naming conventions, tag name conventions and machine state definitions. From that, the group hopes to arrive at a common set of OMAC-recognized naming conventions that can then be promoted to end users and machinery builders alike.

Finally, Fred Hayes of

the Packaging Machinery Manufacturers Institute (PMMI), representing the education subcommittee of the OMAC packaging working group, gave a short update. Three online surveys have been launched on PMMI’s Web site (link to it via www.pack world. com/go/omacsurvey ) at the beginning of April: one for end users, one for OEMs, and one for technology providers. The goal is to try to determine the educational needs and formats for educating each constituency about open architecture controls.

An estimated 60 attendees came to the OMAC meeting. About 70% indicated they’d never before attended an OMAC meeting. The audience was a fairly even mix of end-user packager and converters, and converting and packaging machinery builders. The next public OMAC meeting will be held this fall at Pack Expo Las Vegas.

Editor’s Note: For a basic explanation of OMAC, see www.packworld. com/go/omac.

See sidebar to this article: The converting connection

Discover Our Content Hub
Access Packaging World's free educational content library!
Read More
Discover Our Content Hub
Discover innovations from 400+ packaging & processing suppliers.
The largest PACK EXPO East in history is March 18-20 in Philadelphia! In one convenient location, you’ll discover new technology from top suppliers, get quality problem-solving time with experts and learn the latest trends in free educational sessions.
Read More
Discover innovations from 400+ packaging & processing suppliers.