Since the onset of the COVID-19 crisis, the company has already supplied tens-of-millions of face shields to government and medical agencies in Asia, Europe, and now North America.
“We applaud the manufacturing community’s efforts to reallocate resources to produce PPE to help protect our front-line healthcare and other workers,” states HLP Klearfold President, Steve Frazier. “HLP Klearfold leadership in the clear plastic packaging market has made us uniquely qualified to produce face shields. Our production facility is the largest facility of its kind in the world. We have the capacity to make approximately 1 million printed plastic folding cartons per day but, in light of the need for more PPE, we’ve dedicated much of our focus and manufacturing resources to producing face shields, and we are able to manufacture nearly 600,000 per day.”
HLP Klearfold and Hip Lik Packaging Products repurposed a significant portion of its production capabilities to manufacture three simple, low-cost and effective single-use face shields, two of which it also designed. These face shields are made using the same raw materials, technology, and equipment as used to manufacture the company’s plastic packaging. All three of these designs are economical, lightweight, one-size-fits-most, and easily go over glasses and masks. One is a ready-to-wear face shield with a foam forehead pad and an elastic headband. The other two designs ship flat and require a minimal amount of assembly.
The company is vertically integrated, with several custom PET and PP extruders, manufacturing the films required to make plastic face shields, and it has no material supply limitations. The availability of suitable film has become a deterrent to many manufacturers that have attempted to repurpose to produce face shields in response to the COVID-19 increase in demand.
All of the new face shields are Class 1 medical devices for use by healthcare professionals. To assure potential purchasers of the quality and reliability of its face shields, HLP Klearfold and Hip Lik have gone the extra steps of securing the relevant certifications for such products. Its face shields have been evaluated by third-parties and have been certified to meet both the United States’ ANSI/ISEA Z87.1-2015 and Europe’s EN 166:2001 eye protection standards for droplets and splash.
Hip Lik’s manufacturing facility has been authorized by the FDA under the COVID-19 pandemic Emergency Use Authorization (EUA) as personal protective equipment (PPE) for use by healthcare professionals for medical purposes. The company will remain authorized for the duration of the emergency as described in U.S. Federal Drug & Cosmetic Act, 21 USC 360bbb-3(b)(1), or until otherwise terminated or revoked. Its manufacturing facility and its face shields are FDA registered. Although the face shields have not been FDA “cleared” or “approved”, this is not a requirement for FDA Class 1 face shields. They should not be used in the presence of high intensity heat source or flammable gas.
The face shields are made from one or more of these materials: PET, Frosted PP, open-cell polyurethane foam, and/or knitted polyester elastic.