Flexicon: Sanitary drum dumper with roller conveyor

A new TIP-TITE® Sanitary Drum Dumper allows dust-free transfer of bulk materials from drums to downstream equipment, and rapid sanitizing between changeovers.

This content was submitted directly to this website by the supplier.

Flexicon Corporation

Sep 22nd, 2016

TIP-TITE® Sanitary Drum Dumper

TIP-TITE® Sanitary Drum Dumper

Constructed of stainless steel and suitable for wash-down, the dumper is pneumatically powered and certified for use in areas with hazardous conditions.

A hydraulic cylinder raises and seats the drum against a discharge cone, after which a second hydraulic cylinder tips the drum to an angle of 45, 60 or 90 degrees with a motion-dampening feature. At full rotation, the outlet of the discharge cone mates with a gasketed receiving-ring fitted to the lid of any receiving vessel, creating a dust-tight seal and allowing controlled, dust-free discharge through a pneumatically-actuated butterfly valve into the vessel.

The hydraulic power unit enclosure with sight glass to check gauges and valves, is located on the frame exterior for accessibility during set-up, inspection and maintenance, and houses a pneumatic motor to drive the unit.

It is equipped with a roller conveyor that can be fed by an optional or existing infeed conveyor, allowing drums to roll into place by gravity.

Flexicon Corporation

2021 09 15 Pack Expo Proseal Tray Sealing Solutions

Sustainability and OEE Take Center Stage for Proseal at PACK EXPO Las Vegas

See it at PACK EXPO Las Vegas Booth #C-5244! Proseal will exhibit its tray sealing solutions that combine high speeds, maximum efficiencies, and effective product protection and presentation with sustainability benefits.

Alpha Flex Printer 2nd

Print/Fill/Seal Machine for Sachets

See it at PACK EXPO Las Vegas Booth # C-4703! V-Shapes will debut its AlphaFlex print/fill/seal machine designed for the production of single-dose sachets.

Cw3 Run Wet Combination System

Loma Systems to Showcase Its Latest Technologies at PACK EXPO Las Vegas

See it at PACK EXPO Las Vegas Booth #C-4222! Loma Systems will showcase its x-ray inspection and metal detection solutions for harsh washdown environments.

Mamata M 200 Packaging Machine

Mamata to Exhibit Latest Innovation at PACK EXPO Las Vegas

See it at PACK EXPO Las Vegas Booth #C-4845! Mamata Enterprises will demonstrate its high-speed M-200 Ultra hf/f/s roll stock pouch machine capable of producing 120 ppm mechanical speed with pouch size widths ranging from 100 to 200 mm.

Harpak-ULMA to Demonstrate Its Packaging Innovations at PACK EXPO Las Vegas

See it at PACK EXPO Las Vegas Booth #SL-6101! Harpak-ULMA will demonstrate its latest packaging innovations such as thermoforming, flow wrapping, tray sealing, case packing, augmented reality, and more.

SYNTEGON RPP: HIGH-TECH ROBOTIC SOLUTION WITH EXPERT INDUSTRY KNOW-HOW

SYNTEGON RPP: HIGH-TECH ROBOTIC SOLUTION WITH EXPERT INDUSTRY KNOW-HOW

Automation in packaging is a fast growing trend. The Syntegon RPP platform offers a whole range of possible configurations to suit your requirements. We help you to reach your production targets.

Snapcut Pet Cutting Tool

Synerlink to Demonstrate SNAPCUT PET Cutting Technology at PACK EXPO Las Vegas

See it at PACK EXPO Las Vegas Booth #C-1800! Synerlink will demonstrate its SNAPCUT cutting tool technology that cuts and pre-cuts PET, PP, and other recyclable and recycled plastics (PLA, rPET) at a thickness of 0.6mm.

The Varioline packaging system works with ten robots, distributed among four modules, which enables the machine to handle a total of 18 different packaging variants.

Mastering Complex Production Sequences

This middle-tier German beer producer offers some 25 varieties of beer in returnable glass bottles, so it needed a highly versatile and automated controls architecture.

The Bottling Plant in the Mountains

Sheikh Mohammed Mussallam describes what it’s like to build a brand new water bottling company, A&M Rare, in the remote Pambak Mountains of Armenia.

Heatand Control Lancaster Pa Building Press

Heat and Control Constructing New Facility in Pennsylvania

The new site, located in Lancaster, will expand Heat and Control’s North American manufacturing industry and meet the increased needs of pre-sale and after-market needs, including product/equipment testing, demonstrations, service support, and training.

Trine Modular Labeling Station Accraply

Accraply to Showcase Modular Labeling Station at PACK EXPO Las Vegas

See it at PACK EXPO Las Vegas Booth #C-1800! Accraply will showcase the Trine Modular Labeling Station, an upgrade for existing Trine roll-fed labelers that enables significant process improvements with minimal line disruption.

Standard Parts for Packaging and Processing Machinery and Equipment

Standard Parts for Packaging and Processing Machinery and Equipment

JW Winco is a leading supplier of Standard Machine Components and Assembly Hardware. Standard parts are extremely versatile in their application and can offer great opportunities. Visit our website to learn more!

Cb50 C Pneumatic Scale Angelus

Pneumatic Scale to Exhibit its Canning Line at PACK EXPO Las Vegas

See it at PACK EXPO Las Vegas Booth #C-1800! Pneumatic Scale Angelus will exhibit the CB50C counter-pressure integrated canning line for craft beverage packaging.

Multivac Constructing Multi-purpose Building in Japan

Multivac is constructing a new multi-purpose building in the Tsukuba, Japan that will include production areas, a training center for customers and staff, as well as showrooms for machines.

Torn Apron’s chef-prepared, restaurant-quality grab-and-go meals are packaged in vacuum skin packs that let the bright colors of the fresh ingredients shine through.

Tray Sealer Helps Startup Brand Become a Savory Success

Using a combination of vacuum skin packaging and High Pressure Processing, grab-and-go meal startup Torn Apron is producing 4,000 tray packs/week of restaurant-quality meals that have a shelf life from 50 to 60 days.

Bw Flexible Systems Hayssen Isb

BW Flexible Systems to Demonstrate VF/F/S Bagger at PACK EXPO Las Vegas

See it at PACK EXPO Las Vegas Booth #C-1800! BW Flexible Systems will demonstrate its Hayssen ISB (intelligent sanitary bagger) designed to provide sanitary design, modern industrial machine intelligence, and intuitive operation for vf/f/s packaging.

6c%20 Feeder%20007

Eriez Vibratory Feeder Used in Automated Pre-roll Cannabis System

A custom Eriez 6C electromagnetic vibratory feeder serves as a critical component in a novel automated pre-roll cannabis system that handles up to 2,000 pre-roll cone joints/hr, streamlines the process, and maintains consistent output.

Graphic Packaging to Unveil New Machinery Innovations at PACK EXPO Las Vegas 2021

See it at PACK EXPO Las Vegas Booth # C-2442! Graphic Packaging International will showcase its latest innovations and will debut two new machinery systems.

Matrix to Exhibit at PACK EXPO Las Vegas

See it at PACK EXPO Las Vegas Booth # C-2829! Matrix will demonstrate its fully integrated mini-packaging line and showcase various ProMach brands.

After quality control, the Danish are individually inserted into the clamshells by F4 robots.

Robots Handle Packaging of Pastries at 160 cakes/min

A modular packaging line at J. Skinner Baking Co. uses a number of robots to pack Danish pastries in clamshells and then into cases of various formats.

More in Primary packaging

Krones Process Tech Complete Line 2

Krones to Debut Innovations in Processing at PACK EXPO Las Vegas

See it at PACK EXPO Las Vegas Booth #N-25006! The Krones Process Group North America will officially debut at PACK EXPO Las Vegas’ Processing Zone and will showcase technology ranging from process engineering, integration, and fabrication technology.

Vital Farms’ Egg Bites use a unique packaging and processing approach, baking the product in-pack prior to MAP sealing.

As Café-Hatched Egg Bites Hit Retail Shelves, Vital Farms Reimagines Pack Design, Function

The foodservice channel gave us the egg bites trend with sous vide, but Vital Farms advanced it with a new retail pack format allowing for in-pack baking in CPET trays at the production facility. Consumers simply microwave the MAP trays at home.

Triangle Liquid Fill Vffs

Triangle to Showcase VF/F/S Bagger at PACK EXPO Las Vegas

See it at PACK EXPO Las Vegas Booth #C-2614! Triangle Package Machinery Co. will showcase its Model XYTLF liquid fill vf/f/s bagger featuring a unique squeegee that keeps product out of package seals.

Multivac, Italianpack Sign Collaboration Agreement

Multivac signed a collaboration agreement with packaging machine manufacturer Italianpack, expanding its product portfolio in the tray sealer sector.

Mms2 01 Digital Without Background

Modular Multi-lane Weighing System

See it at PACK EXPO Las Vegas Booth #SL-6106! WIPOTEC-OCS will introduce its modular multi-lane system is 50% smaller than the previous model and features a modular, plug in-and-out design that enhances the unit’s flexibility.

Modular Liquid Filler

Syntegon’s LFS filling machine’s modular concept allows for individual configurations to meet the needs of dairy and food manufacturers and is designed to fill liquid, viscous, and pump required products into preformed containers.

Getty Images 1287267694

Beverage Manufacturing: Machines Needed for a Smarter Plant Floor

With 67% of beverage manufacturers planning to eventually add additional packaging equipment to their operations, flexibility is the key element that is needed in new machinery.

Thanks to a new AbilityOne contract, Transylvania Vocational Services needed to increase production of its instant non-fat dry milk to better serve food banks.

Bagger Helps Dry Milk Packager Meet Food Bank Demand

With a new contract to serve increasing food pantry needs amid the pandemic, a maker of ready-to-eat foods and various powdered products chose a VFFS bagger and auger combination to help improve efficiency as well as sanitation.

All[ax New Building Outside

Allpax Moves to New Manufacturing Center

Allpax, a product brand of ProMach, completed its move to a new facility in Covington, La.— doubling the size of its offices and manufacturing area from 40,000 to 86,000 sq-ft.

Aranow An650 Tw

AlliedFlex Technologies and Aranow Form North American Sales, Marketing Alliance

Aranow, Barcelona, Spain partnered with AlliedFlex Technologies, Sarasota, Fla., as its exclusive North American sales and marketing partner to handle its stick pack packaging systems product line.

Nutra Pack Launch

Nutraceutical Packaging Equipment Company, Nutra-Pack Systems, Launches

Nutra-Pack’s solutions are designed for a wide variety of nutraceutical applications, including gummies, blisters, solid dose tablets, capsules, and softgels, liquids and powders.

[download Image File] Media Release E402040027 Project Announcement

Bulk Material Processing, Packaging Project Increases Process Yield and Improves Production

This bulk material processing and packaging project was designed, engineered, installed, and commissioned by National Bulk Equipment (NBE).