Controls & Machine Components

Aerotech: Single-axis motor drive

Aerotech’s XC4e PWM digital drive is a single-axis motor drive designed for brushless DC, brush DC, voice coil, and stepper motors at up to 340 VDC operating voltage and 30 A peak current.

April 9, 2019

Controls & Machine Components: Page 42

Controls & Machine Components

Encoder Products Co.: Absolute encoders

Absolute encoders from Encoder Products are available in shaft and blind hollow bore in sizes 36 mm, 58 mm, and standard size 25 with a 2.5 in. housing.

April 2, 2019

Controls & Machine Components

NK Technologies: DC current transducer

NK Technologies introduces the DT-BB DC current transducer rated to measure DC current at working voltages to 1500 VDC. Its design allows a split-core transducer to be installed over existing bus bars or wire and can be mounted on a panel or DIN rail.

March 29, 2019

Controls & Machine Components

Nanotec: Compact motor controller

Nanotec offers the CL4-E motor controller suitable for both brushless DC motors and stepper motors and has a peak power of 1050 W. Its rated current is 6 A, additional heat sinks are not required.

March 26, 2019

Controls & Machine Components

Edge programmable industrial controller adds IEC 61131-3

Opto 22 announced the addition of international standard IEC 61131-3 programming options in its groov EPIC® edge programmable industrial controller.

March 25, 2019

Controls & Machine Components

Rockwell Automation: Real-time controller

Rockwell’s Allen-Bradley CompactLogix 5480 controller combines a Logix control engine and the Microsoft Windows 10 IoT Enterprise operating system in a single platform, allowing workers to view machine information at its source.

March 19, 2019

Controls & Machine Components

AutomationDirect: Stepping motors

AutomationDirect offers SureStep® IP65 rated high-torque stepping motors are available with industry-standard NEMA 17, 23, and 34 mounting flanges and provide holding torque from 61 to 1288 oz-in. The motors use two-phase technology with 200 full steps per revolution or 1.8 degrees per full step.

March 15, 2019

Controls & Machine Components

Matthews Marking: Universal controller for print technology

Matthews Marking Systems product line allows integration of marking and coding equipment into machines.

March 11, 2019

Controls & Machine Components

ABB: DC variable speed drives

The DCS880 VSDs DC variable speed drives (VSDs), built on ABB’s all-compatible drive platform, can control a variety of DC motor applications. With the new drives, customers who use a DC system have the option to continue using DC technology while better aligning with AC advancements.

March 8, 2019

Controls & Machine Components

Clippard: Gradient valves

NIV series gradient valves from Clippard feature multiple 2-way, normally-closed solenoids connected around a central body. Each actuator operates independently, allowing for flow of various media to be mixed or for one media to be split into multiple streams.

March 6, 2019

Controls & Machine Components

B&R: Safety module

B&R Industrial offers the X20SO6530 digital output module that provides six safety relays on a unit with the X20's standard 25 mm width. Unit has single-channel isolated outputs with a maximum switching capacity of 230 VAC / 6 A or 24 VDC / 6 A.

March 5, 2019

Controls & Machine Components

Antaira Technologies: Industrial wireless device

Antaira Technologies introduces the AMS-2111 Series industrial wireless device designed for industrial and enterprise wireless access applications. Based on IEEE 802.11 b/g/n, the access point supports high-speed data transmission of up to 150MBps.

March 1, 2019

Controls & Machine Components

JW Winco: Expanded range of rod end bearings

JW Winco, Inc., a Ganter Co., offers an expanded range of rod end bearings, including GN 648.1/GN 648.2 steel zinc-plated, tapped type, or with threaded stem and GN 648.5/GN 648.6 stainless steel, tapped type, or with threaded stem.

February 27, 2019