The needs of CPGs and the machinery required from OEMs to churn out goods were already experiencing a sea of change before COVID-19 completely turned supply and demand on its head. To keep up with these changes, many CPGs employed more CPG contract manufacturing and packaging providers to stay ahead of the evolving whims of consumers seeking convenience, variety, and more eco-friendly items. OEMs report that more than 70% percent of the time, CM&Ps generate technical specifications for equipment, easing some of the burdens on CPGs.
“[CM&P] business has grown drastically at an average growth rate of 10.2% over the last five years. We have segments growing much faster than that, but overall, everybody’s experiencing a very high growth rate,” says Ron Puvak, executive director of The Association for Contract Packagers & Manufacturers (CPA).
Some of that is attributable to COVID-19, like in food and beverage, which are traditionally the most significant segments of CM&Ps. Still, the numbers indicate that the spike remained once CM&Ps met the immediate need.
“CM&Ps haven’t lost that business,” Puvak says. “There has been a conversion [by CPGs] away from doing it in-house, or with dedicated lines, to moving it out to contract facilities.”
Contract Manufacturing and Packaging to Keep Growing
Another reason Puvak projects this growth to continue—particularly in food and beverage—is where once it was common for CM&Ps to have short-term contracts of six months or less, many are now signing longer-term agreements. Others are turning to CM&Ps as risk management against future supply chain issues. Rather than dedicate complete in-house lines, CPGs and processors can be more flexible and put the capital investment in the hands of the CM&Ps.
To understand these new business dynamics, PMMI Business Intelligence surveyed PMMI members on their machinery sales to the contract manufacturing and packaging market. This data determines what areas are experiencing the most growth and if the growth is here to stay.
Most often, OEMs find that sales to CM&Ps are dictated by who can quickly deliver the most flexible equipment as, more often than not, a variety of OEMs can meet CPG specs for a particular machine.Food and beverage dominate the largest markets for equipment sold by responding OEMs with beverages, including alcohol (17%) as the largest market, proteins (11%), and confectionery (9%), joining medical devices (13%) in the top four. Nutraceuticals and supplements are the most popular market among respondents, with over half (53%) selling into that sector, followed by baked goods and confectionery at 41% each, beverages including alcohol and over-the-counter pharmaceuticals rounding out the top five, each at 39.3%.
When PMMI asked OEMs about the automation or technology needs CM&Ps are asking for, integrated lines are the most popular solutions. This aligns with Puvak’s belief that some CPGs are moving entire processes to CM&Ps.
When CPGs need single pieces of machinery, they are most likely to buy conveying, feeding, and handling equipment (34%), bagging, pouching, and wrapping equipment (32%), and cartoners/casepackers (31%). Puvak indicates that these numbers are typical as end of line equipment traditionally dominates CM&P equipment purchases. He adds, however, that many CM&Ps are seeing opportunities to address labor issues via machinery purchases.
Variety packs, for example, are something that CM&Ps might have done previously with manual labor, but as robotics become more affordable and the strain on the labor force continues, he has seen an increase in incorporating OEM solutions to replace these repetitive functions.OEM sales to CM&Ps most often represent between 10% to 25% of OEM sales, with a minority exceeding 50% of sales to CM&Ps.
According to Puvak, contract manufacturing and packaging providers are looking for flexibility and asking themselves one question, “Can I purchase something that I can use a variety of ways and for a variety of products?”
In addition to flexibility, PMMI’s survey asked OEMs to note some specific demands and needs that CM&Ps are requesting when they purchase machines, and the following were the most common:
Quick changeovers
Predictive maintenance and production monitoring
Versatility for different package formats
Lines need to build in new labeling requirements
Easy-to-operate machinery
Turnkey systems for secondary packaging
Sophisticated vision systems and robotics
Process automation
For more in-depth findings and to read verbatim responses of OEMs, PMMI members can download the survey results here: oemgo.to/oemcmpsurvey
Explore our editor-curated report featuring cutting-edge coding, labeling, and RFID innovations from PACK EXPO 2024. Discover high-speed digital printing, sustainable label materials, automated labeling systems, and advanced traceability solutions that are transforming packaging operations across industries.
Looking for engineering services? Our curated list features 100+ companies specializing in civil, process, structural, and electrical engineering. Many also offer construction, design, and architecture services. Download to access company names, markets served, key services, contact information, and more!
OEMs report that more than 70% percent of the time, CM&Ps generate technical specifications for equipment, easing some of the burdens on CPGs.
