This technology enables the formation of boxes directly on the machine, thanks to a simple human-machine control interface which enables the entry of parameters for the required packaging dimensions. The entire process is automated and can be monitored via a system of internal cameras that enable the operator to control all processing cycles.
From a structural point of view, the machine is surrounded by interlocked panels fitted with photocells that in the event of opening immediately shut off power to the machine, shutting down all operation.
The box formed by FreeBox is made up of a base and two end sections that are produced by the machine in two separate areas. The end sections are formed on the left-hand side of the machine, while the base is formed on the right-hand side, to then be joined at the center for gluing and box forming.
