Sustainable experts get down to business basics

Chicago will host Sustainability in Packaging 2018, March 12-14.

Jan 8th, 2018

Pw 381642 Screen Shot 2018 01 08 At 1 48 06 Pm

Specifically focusing on making sustainable packaging a commercial reality, the 2018 agenda for Sustainability in Packaging US will discuss current trends such as the circular economy, natural resource extension, corporate commitments, addressing food waste, ecommerce, regulatory trends around the globe, and end of life challenges.

The 2018 program will feature three full days of tours, workshops, thirty presentations, ten panel discussions and five engaging tracks from some of the top experts in the packaging industry, including General Mills, Waste Management, WestRock, Dow, Starbucks and Pepsi-co.

Years after the initial push for sustainable packaging, where are we? We invite you to come discover the progress and pitfalls.

Packaging World is a media partner for the event, more information can be found here.

Valio of Finland is testing this injection-molded lid made of a biocomposite.

Lids formed from a biocomposite

Valio, Finland’s largest dairy, will distribute 10,000 wood fiber-based, injection-molded, snap-on, reusable lids made from a biocomposite, while encouraging consumers to reduce food waste.

Automation and Robotics are Top Two Operational Improvements for Food Manufacturers

Food Manufacturers Top Two Improvement Priorities

Operational improvements that impact food manufacturers the most continue to focus on automation and robotics.

The redesign, which included packaging for the company’s Original Honey Smoked Fish and five other flavors, ‘is highly inspired by the original, with a design that takes its cues from old fish market signage.’

Salmon with a Smile: Fish Brand’s Bold Personality Captured in Redesign

New label graphics for Honey Smoked Fish Co.’s salmon products evokes the original founder’s ‘big personality,’ while taking its cues from old fish market signage.

Packfeeder SLU

Un Pac Ked Podcast Graphic

Cannabis Packaging: Don't Fear the Reefer

UnPACKed with PMMI Podcast breaks down the latest developments in cannabis packaging as more and more states open the door to legalization.

Enercon and Innovation decided on an out-of-the-box configuration: two sealers per line, configured at the two different bottle heights required.

Sealing Two Bottles Sizes on One Line

The Department of Veterans Affairs’ Consolidated Mail Outpatient Pharmacy (CMOP) needed a tailor-made system to safely seal two bottle sizes.

Seven key steps for a capital project RFP

RFP Process Challenges and Solutions

Having upfront clarity into needs and establishing standards for what to use (and why), are the two biggest shortcomings cited by Vision 2025 participants in the Request for Proposal process.

The Absolut Comeback bottle was designed to to promote and visualize the benefits of recycling.

Broken Glass Makes a Comeback in Limited Edition Absolut Bottle

Made from pieces of broken, recycled glass, the Absolut Comeback bottle is created to encourage recycling and a more circular lifestyle among the vodka producer’s consumers.

New digital press at Kinyosha in Japan.

Digital Ink-Jet First in Japan

Following a successful on-site acceptance test, Tokyo-based Japanese packaging printer Kinyosha Printing Co., Ltd. has started production on their newly installed UTECO Sapphire EVO Press.

Bullet Tools EZ Shear cutter is now packaged in a single-wall corrugated case versus the double-wall shipper it was using previously.

Less Packaging, Greater Protection with new Amazon-Certified Shipper

Construction tool company redesigns its packaging with Amazon-approved vendor to provide more protection for its cutting tool while meeting the Amazon’s sustainable packaging guidelines.

MAP (Modified Atmosphere Packaging) preserves food and extends shelf life

MAP Leads Fresh Food Preservation Methods

Modified Atmosphere Packaging is prevalent among participants of a new PMMI Business Intelligence report, but technologies such as High Pressure Processing (HPP) are continuing to expand as well.

Dr. R. Andrew Hurley, PhD

Progressive Disclosure: The Full-Course Meal of Packaging

Progressive disclosure of information about a product through on-pack labels and instructions contained within the packaging enhances the consumer’s experience one action at a time.

Young Living, headquartered in Utah with farms and operations around the world, makes a wide range of essential oils and other products.

Hitting Essential Filling Speeds for Essential Oils

With expansions in pharmaceutical, medical, and food and beverage applications, the essential oil market is booming. Young Living turned to Syntegon (formerly Bosch Packaging) to triple its filler speed and improve yield.

Brillo sculpture from 1964 not only pays homage to beautiful package graphics, the Brillo boxes were produced in a 'factory' and displayed like products on a store shelf.

The Power of Iconic Package Design

Warhol retrospective at Chicago’s Art Institute recalls how iconic brands and their alluring package design inspired the pop art movement and catapulted the artist into history.

The domestic collection of plastic bottles for recycling rose 52 million pounds, or 1.8%, to reach nearly 2.9 billion pounds in 2018.

Static Bottle Recycling Rate is Insufficient to Meet CPG Demands for rPET

A new report shows a U.S. recycling rate for PET and HDPE bottles of 28.9% in 2018, far below the volume needed to meet CPG’s upcoming goals around the use of recycled content.

Bag Discharge Model Xym15 Vffs Bagger

Bagger, Weigher Lead to 100% Production Improvement

This California poultry producer had been experiencing bad seals, incorrect package weights, and low speeds, but it realized a 100% improvement in production with a new bagging and weighing system.

Report: Innovative New Controls at PACK EXPO Las Vegas

Ten intrepid Packaging World editors fanned out across PACK EXPO Las Vegas in October in search of packaging innovation. Here's what they found.

Report: Innovative New Robotics at PACK EXPO Las Vegas

Ten intrepid Packaging World editors fanned out across PACK EXPO Las Vegas in October in search of packaging innovation. Here's what they found.

Sovereign implemented serialization and aggregation on all three configurations of packaging lines at once.

CDMO Speeds its Line with Open-Source L4 Serialization System

With the serialization deadline approaching, Sovereign Pharmaceuticals implemented open-source software that allows the company to make their own changes and improve packaging efficiency.

Multifunctional Equipment: Challenges and Solutions

Multifunctional Equipment: Challenges and Solutions Faced by CPGs Today

Finding a standardized process to manage changeover, and balancing flexibility, reliability and cost are some of the major pain points for Vision 2025 participants.

More in Home

Vital Proteins Collagen Options

Rotary Filler Helps Keep Pace With Booming Collagen Market

To keep up with skyrocketing demand for its collagen powders, Vital Proteins turned to Spee-Dee Packaging Machinery and its rotary filler. It boosted production from 20 to 100 plastic canisters a minute, also improving safety and ease of operation.

Report: Innovative New E-Commerce at PACK EXPO Las Vegas

Ten intrepid Packaging World editors fanned out across PACK EXPO Las Vegas in October in search of packaging innovation. Here's what they found.

Oatly's Non-Dairy Frozen Dessert uses paperboard pint packaging that uses a biopolymer coating to resist moisture.

Oatly Frozen Dessert is Plant-Based from Product through Packaging

Using oats rather than cow’s milk for its frozen dessert, Oatly also opts for a paperboard ice-cream pint container with a coating made from sugarcane rather than petroleum.

Shown here is a corrugated case of 30 cartons just before the flaps are closed and sealed.

Sanofi Stick Packs Run at 800/min

Dual-filler liquid stick pack line for antacids and analgesics includes an innovative robotic transfer concept that plays a big role in enabling throughput of 800 packs/min.

Survey interviewees expressed a sense of caution around in-store refill models, such as this one at U.K.’s Waitrose supermarket, due to issues such as product shelf life.

Alternatives to Plastic Packaging Not Always More Sustainable

Bowing to consumer pressure to eliminate single-use plastic packaging, CPGs and retailers switch to alternative materials—sometimes creating a greater environmental burden in the process.

Food Manufacturers Look to Reduce, Recycle and Reuse

Food Manufacturers Look to Reduce, Recycle and Reuse

Improvements to recyclability and sustainability, along with the desire to extend shelf life and prevent contamination, are some of the drivers of change in packaging formats and materials.

Voice of the Food Manufacturer: Equipment Needs

Voice of the Food Manufacturer: Equipment Needs

Cleaning, sanitation, changeovers and data collection are all top of mind for food manufacturers considering equipment needs today.

Report: Innovative New Pharmaceutical Packaging at PACK EXPO Las Vegas

Ten intrepid Packaging World editors fanned out across PACK EXPO Las Vegas in October in search of packaging innovation. Here's what they found.

Roberta Barbieri, Vice President Global Sustainability, PepsiCo,

PepsiCo Accelerates Plastic Waste Reduction Efforts

Roberta Barbieri, Vice President Global Sustainability, PepsiCo, shares the strategies the company is using to reach its ambitious new sustainable packaging goals.

PepsiCo’s bubly sparkling water line was among the Top 25 Breakthrough Innovations, aligning with sparkling water’s position as the fastest-growing category in bottled water, at 30%.

Top 25 Breakthrough CPG Product Innovations of 2019

Products on the list include those in the food and beverage, personal care, OTC, and petcare categories and reflect consumer trends such as good-for-you ingredients, convenience, and a move away from traditional beverage products, among others.

Report: Innovative New Materials at PACK EXPO Las Vegas

Ten intrepid Packaging World editors fanned out across PACK EXPO Las Vegas in October in search of packaging innovation. Here's what they found.

J&J Snack Foods' X-Ray Inspection Systems from Mettler-Toledo Safeline

J&J Employs Versatile X-Ray for Mixed Snack Foods

To maximize detecting capability, J&J Snack Foods recently installed three x-ray systems from Mettler-Toledo Safeline, including an X33 model in 2017 and another X33 and a two-lane X36 model last year.