Search

Type: Video

Line Vac Air Operated Conveyor Video

EXAIR's compressed air operated Line Vac™ connects to standard hose or tube to create a powerful in-line conveyor. The compact design features large throat diameters for maximum throughput capacity. Eleven sizes in aluminum, ten sizes in stainless steel and five sizes in hardened alloy are suited to a wide variety of transfer applications. CE compliant. Mounting brackets available.

September 16, 2013

Controls & Machine Components

E-Vac Vacuum Generators Video

E-Vac® compressed air powered vacuum pumps provide instantaneous response and are most commonly used for pick and place operations. These CE compliant single stage vacuum pumps are a low cost venturi available in a variety of sizes and flows along with a selection of suction cups suitable for a wide range of applications. Models for porous and non-porous applications are available. This video can help to select the appropriate style for your application.

September 16, 2013

Conveying & accumulation

Drum Vac Video

EXAIR's compressed air operated Reversible Drum Vac™ System attaches quickly to any closed head 5, 30, 55 or 110 gallon drum. Its high powered vacuum fills the drum in less than two minutes. With the simple turn of a knob, the same stainless steel pump quickly empties the drum. Coolant sumps can be easily refilled, floor spills vacuumed, or contaminated liquids transferred to filtration tanks in minutes. The flow rate in and out of the drum can be controlled with the knob, making it ideal for dispensing liquids.

September 16, 2013

Conveying & accumulation

Chip Vac Video

EXAIR's Chip Vac™ picks up dry or wet chips and delivers them directly to an ordinary 5, 30, 55 or 110 gallon open-top drum. The CE compliant Chip Vac is used to clean chips from fixtures, floors and work surfaces of machining centers, lathes, saws, mills and other industrial equipment. The powerful suction is ideal for fast and efficient cleaning.

September 16, 2013

Controls & Machine Components

Cold Gun Video

EXAIR’s Cold Gun Aircoolant System™ makes it possible to replace messy mist systems and improve dry machining operations using clean, cold air! It’s a new solution to an old problem. Heat build up on dry machining operations reduces tool life and machining rates. The CE compliant Cold Gun Aircoolant System produces a stream of clean, cold air at 50°F (28°C) below supply air temperature. Operation is quiet and there are no moving parts to wear out. It will remove heat to prolong tool life and increase productivity on machining operations when liquid coolants cannot be used.

September 16, 2013

Controls & Machine Components

Static Eliminator Video

A new technology solution to the old problem of static build-up. EXAIR Static Eliminators maximize ionized airflow while minimizing compressed air consumption. A small amount of compressed air is used to entrain a high volume of surrounding air. This combined stream is ionized by an emitter point (or points) and delivered to the charged surface. Static is neutralized from distances up to 20 feet (6.1m) away. Thus, EXAIR Static Eliminators work effectively in spite of obstructions, three dimensional configurations, web "rippling", etc.

September 16, 2013

Controls & Machine Components

Air Knife Video

EXAIR's Super Air Knife™ is a quiet, hard-hitting curtain of air for blowoff, cleaning, drying, and cooling, dramatically reducing compressed air usage and noise when compared to other blowoffs. The Super Air Knife offers a more efficient way to clean, dry or cool parts, webs or conveyors. It delivers a uniform sheet of laminar airflow across the entire length with hard-hitting force. Even at high pressures of 80 PSIG (5.5 BAR), the sound level is surprisingly quiet at 69 dBA for most applications! See the CE compliant Super Air Knife in action!

September 16, 2013

Controls & Machine Components

Chip Trapper Video

The patented Chip Trapper™ offers a fast, easy way to clean chips, swarf and shavings out of used coolants and other liquids. The Chip Trapper vacuums the coolant or liquid that is filled with debris and traps all the solids in a reusable filter bag. Only the liquid pumps back out. The CE compliant Chip Trapper is ideal for use on machines with sumps, parts washers, tanks and storage containers of contaminated liquids.

September 16, 2013

Controls & Machine Components

Cabinet Cooler Video

EXAIR Cabinet Cooler® Systems are a low cost, reliable way to cool and purge electronic control panels. EXAIR Cabinet Coolers incorporate a vortex tube to produce cold air from compressed air - with no moving parts. The compact Cabinet Cooler can be installed in minutes through a standard electrical knockout. NEMA 12, 4 and 4X Cabinet Coolers that match the NEMA rating of the enclosure are available in many cooling capacities for large and small control panels. They are the only compressed air powered coolers that are CE compliant. Available in 316 Stainless Steel also.

September 16, 2013

Controls & Machine Components

Air Nozzle and Safety Air Gun Video

EXAIR's engineered Air Nozzles and Safety Air Guns reduce noise levels and air costs. "Go Green" by upgrading your blowoff, cooling, and drying operations to award winning Super Air Nozzles. EXAIR's engineered Air Nozzles are a simple solution to reduce excessive air consumption and noise levels on compressed air blowoff operations. Air savings, compared to open copper tubes or pipes commonly used for blowoff, can be as high as 80%. Safety Air Guns use engineered air nozzles for high performance. Watch our video to see these CE compliant Air Nozzles and Safety Air Guns in action!

September 16, 2013

Secondary Packaging

Hartness expands product portfolio

Hartness assumes responsibility of Meurer product line in North America adding mid-speed case packing and film solutions to end-of-line product portfolio.

September 16, 2013

Cartons and boxes

Off The Shelf: Aseptically packaged tomatoes are packing particulates

Herzel Canning Co. & Farms is aseptically packaging cut tomatoes in 26.46-oz cartons. The firm is believed to be the first to commercialize such a package with particulates.

September 13, 2013

Filling/capping, liquid & viscous

Video: Rennco’s new tube stock sealer delivers cost effective, food quality bags

Rennco’s new stainless steel sealer makes empty three-sided bags from a variety of tube stock material at a lower cost than using pre-made bags. Bag materials effectively sealed include Poly, PVC, and Barrier films. The new sealer is offered in two compact models, a 20-inch and a 32-inch version.

September 12, 2013

Conveying & accumulation

Video: KLEENLine’s reciprocator-shuttle conveyor delivers speed and flexibility

The KLEENLine stainless steel Servo Reciprocator rapidly transfers single rows of product into multiple rows and orients them for efficient processing or packaging. Additional applications include array formation, right angle transfers and loading for ovens, and multi-tiered cooling conveyors, and proofer flights.

September 12, 2013

Secondary Packaging

Video: Currie by Brenton’s MasterPal palletizes or depalletizes fast and gently

The Currie by Brenton MasterPal™ loads or unloads almost any type of product – bulk items, trays, large loads, and bundles – up to five full 500 pound layers a minute using a servo-operated rotary tool and slat system that quickly and gently handles full layers of product with each motion and outperforms vacuum pick and rollers.

September 12, 2013

Flexibles

Video: Allpax conducts research project to improve pouch sterilization

Allpax put more than 15 food products packaged in various microwaveable pouches and bowls and tested them to identify package and product combinations that hold the most promise of quality and capacity improvements for brand owners.

September 12, 2013

Bag/pouch fill/seal (pre-made bags)

Video: Matrix showcases the Toyo Jidoki premade pouch filler sealer

The Toyo Jidoki fill and seal pre-made pouch machine is rated at up to 55 flat, standup, or press-to-close pouches per minute and offers a stainless steel, wash-down construction. The new machine is ideal for packaging frozen foods, seafood, snacks, rice, pet foods, medical devices, and other products.

September 12, 2013

Bag/pouch fill/seal (pre-made bags)

Video: Matrix introduces the new Metis continuous & intermittent motion vertical form-fill-seal machine

While other continuous motion bagging machines are locked into a narrow band of production speeds that make it hard to accommodate changes in product flow, the new Matrix Metis™ PackML compliant machine can operate effectively over a wide range of speeds and dependably produce quality packages hour after hour.

September 12, 2013