A stack of knocked-down gift box bottoms and tops are pushed into a center-folded tube of film that provides clarity, as well as puncture and tear-resistance. The tube is side-sealed with two impulse wires. Next, a cross-sealing station employs hot-knife jaws that create a seal between the leading and trailing pack of boxes before cutting in the seal area between the packs. Packs then are conveyed through a heat tunnel. Euipment is supplied by Shanklin.
E-BOOK SPECIAL REPORT
42 Best Package Designs
Sign up to receive timely updates from our editors and download this e-book consisting of our editors' picks of most notable package designs. Updated for 2014!
Contract packager Platinum Packaging employs nearly 50 Longford friction feeders that deliver gift box blanks from a magazine onto a lugged conveyor for downstream shrink wrapping. Feeders can also be set up to deliver calendars to a plow so that another downstream feeder can insert a paperboard card into the calendar. Dong so helps provide rigidity to the calendar after it's shrink-wrapped.
This continuous-motion bagger from Heat and Control uses patented twin heat-sealing jaws that simultaneously seal the top of the leading pack and the bottom of the subsequent pack. These vf/f/s machines produce 1- to 3-oz bags for vending machine and multi-pack sales, at speeds to 150/min. That rate is three times faster than previous vf/f/s equipment.
Cross-feeder conveyors deliver snacks to Ishida 14-head weigh scales from Heat and Control. Individual load cells measure the weight of product in the scales. Integrated controls are used to select the right combination of buckets to release an accurate amount of product into a bottom-sealed tube of film.
What if a delta-style robot for high-speed pick-and-place packaging operations could be built for half the cost of those currently available in the marketplace? That was among the questions posed by Festo representatives December 4 at a full-day press gathering.
Edna Valley Vineyard’s first-of-its-kind accumulation table from Garvey packs a lot of benefits in a small space. Positioned between a capsule applicator and capsule spinner, the 5’x6’ oval table boosts bottling efficiency by 20%. It provides five minutes’ accumulation at rates of 120 bottles/min.
Music Mountain Water needed labeling equipment capable of running in excess of 350 bottles/min. But fast changeover and a compact footprint were also crucial. This Trine glue-applied roll-fed labler filled the bill.
Bowl flow on the Garvey accumulation table downstream of TE banding and ahead of case packing is seen in overhead and floor-level views. Bowls will continue to recirculate on the accumulation table, which operates without active devices such as photoeyes, until downstream operations are cleared.
Bowls are conveyed into full-surround flights that provide a 360 degree deck that perfectly centers each tamper-evident band. Bowls are secured in the flights all the way from the infeed of the trio of tamper-evident band applicators through the heat tunnel. Tamper band applicators were supplied by Axon Corp.
These continuous-motion vertical form/fill/seal Robag 2Ci machine are from TNA North America. To meet growing sales of its potato chips, Snyder installed two 2Ci machines, and then later a third. The new vertical form/fill/seal machines replace outdated equipment at Snyder of Berlin.
On the two potato chip lines, the vf/f/s machines are topped with 14-head Ishida scales from Heat and Control.. Product giveaway has been reduced on several vertical form/fill/seal lines at Snyder of Berlin thanks to greater accuracy of 14-head scales, such as the one shown here. A combination of buckets is selected to dump the amount of snacks that best meet a bag’s target weight.
A worker at New Berlin, WI-based Anderson Seal inserts O-rings into plastic bags on a roll on a semi-automatic bag printer/counter/sealer. The machine is dedicated to products Anderson Seal distributes to Harley-Davidson.
Installed about a year ago as a replacement was a Model 127SL case/tray packer from S.V. Dice. Its rated speed is 35 cases or trays/min, though currently Gavi–a typically runs in the range of 25/min. After tray blanks are picked and erected and collated cans are pushed onto them, filled trays are discharged toward the shrink wrap system.
After film is pulled through a vf/f/s section and bags are filled with coffee, a heater bar heat seals the top of the bags. Later, a tin-tie is automatically applied and folded for each bag. Finally, each bag has tape applied to its top and the bags are then discharged from the machine.