Download this free, 90-page Primary Packaging Line Equipment Playbook jam-packed with strategies for success, best practices, and pitfalls to avoid. Learn more >>
Read More on:
Sustainability > Strategy
Machinery > Conveying & material handling
Machinery > Palletizing
Article |
May 31, 1995
Send to Kindle
Send to KindleBarber Foods pops for an alternative
When stretch wrap's true colors showed through-and weren't green-this chicken product producer switched to an adhesive palletizing system.
By
The customer is always right "There's no difference in performance between the two" says Whittier. "The only drawback is that the person stacking the cartons has to remember to turn the glue off before he gets to the top layer so that the top of the pallet stays clean. But in a ten-high stack of cases that also saves us 10% of the glue costs." Unforeseen benefits come in the form of savings: the new system has reduced Barber's pallet unitizing costs by 32% and has saved a minimum of 1.5 hr/day in labor time. "It's doing as good a job as stretch wrap did" Whittier goes on "it's just the green issue. You might say we're able to sleep a little better at night."
Barber Foods a Portland ME-based producer of chicken products including boneless stuffed breasts stretch wrapped its pallet loads for years with minimal problems. But as environmental consciousness came to the fore stretch wrap disposal became an issue. "We had customers threaten that they might not buy our product unless we stopped using stretch wrap" says Bill Whittier production manager of Barber Foods. Some customers says Whittier wanted to charge Barber $5 per pallet to cover their disposal costs. The company sells to foodservice retail convenience store and warehouse club channels throughout North America and exports to companies as far away as Russia. Yet another customer told Barber about the Lock'n'Pop system from Key Tech (Mukilteo WA). In 1992 the system was installed. Two pneumatically-operated nozzles mounted near the end of a packaging line spray measured amounts of the liquid onto case tops. After taping and ink-jet coding hand-packed
cases pass a photo-eye that triggers application of Lock'n'Pop onto the top of the carton. Boxes are then removed from the conveyor manually and stacked on a pallet to a designated height. When the shipment reaches the retail or foodservice outlet cases are easily unstacked or "popped" apart thanks to the low tensile strength of the adhesive. The product also leaves the printing intact. "All of our cases are preprinted with a pledge from founder Gus Barber" says Whittier. "We were very concerned that the adhesive wouldn't damage the printing. We did a lot of testing before we purchased the system." 
E-BOOK SPECIAL REPORT
45 Best Package Designs
Sign up to receive timely updates from our editors and download this e-book consisting of our editors' picks of most notable package designs.
Comments(0)
Add new comment