- Contract Packaging
- Leaders in Packaging
Article | November 2, 2012
Mineral oil: a need for more data
Concerns arise over the potential migration of mineral oil hydrocarbons into food from recycled paperboard packaging. What can we do as an industry to address the issue?
Nearly 90% of the U.S. population has access to paper recycling services, and more than 65% of all paper that is consumed is recovered. In accordance with the Sustainable Packaging Coalition’s (SPC) Definition of Sustainable Packaging (see www.bit.ly/pwe00427), it is essential to optimize the use of renewable or recycled source materials in package design, to help ensure sustainable management flows by encouraging waste reduction and resource conservation. Utilizing recycled-paper content can have a number of environmental benefits, such as landfill diversion, energy savings, and resource conservation, while still meeting the performance criteria required by many packaging manufacturers.
There are tremendous opportunities to increase and utilize recycled-paper content in packaging, but we need to be aware of products entering the recycling stream. By designing products from the start with sustainability and their full life-cycle impacts in mind, they can be made in a way that facilitates effective reprocessing, ultimately allowing them to become source materials for new products. The SPC, through its systems-based approach, is working toward engaging stakeholders throughout the supply chain in an attempt to make such efforts common practice.
Related Sponsored Content
However, this remains a work in progress, and there have been, and will continue to be, bumps along the way. In early 2011, a number of technical reports and media stories questioned the quality of recycled paperboard; in particular, concerns were raised over potential packaging migrants. The possible migrants were identified as mineral oil hydrocarbons (MOH), with their primary source being traced back to inks used in newsprint entering the European recycling stream. The researchers engaged in these studies found that petroleum-based inks used in European newsprint could potentially migrate from the recycled content into some food products, with a high degree of variability between products. The concerns focused on the high levels of uncertainty around MOH’s potential impacts on the human body and their potential to migrate from such packaging into foods.
MOH refers to an extensive range of quality grades, and while some are deemed safe for use, others are known to be hazardous. It is important to note that the increasing use of soy-based inks in North America is helping to eliminate some of these concerns.
While startling at first, it became clear in studying this topic that the research around MOH migrants is scarce, and as a result, uncertainties and skepticism around testing methodologies and associated risks remain. In June, the European Food Safety Authority Panel on Contaminants in the Food Chain (CONTAM) released an official “Scientific Opinion on Mineral Oil Hydrocarbons in Food” (see www.bit.ly/pwe00428) in response to many of the reports and press releases previously mentioned. The opinion was intended to assess the risks related to MOH occurrences in food and draw on that information to determine the need for possible regulatory measures. The opinion provides a comprehensive overview of the subject with an emphasis on exposure levels in Europe. In general, the panel was able to identify a number of potential contamination sources, though data and resource limitations prevented the panel from drawing firm conclusions on the associated risk. In the end, the panel deemed it inappropriate to establish health-based guidance for MOH exposure at this time.
The CONTAM panel did find that a significant source of dietary exposure to MOH may come from food contaminated by the residual inks in recycled paperboard packaging in Europe, but migration is highly dependent on the type of food. The panel identified food groups that are of particular concern, including products high in animal fat, breads, confectionary goods, grains, pastas, sausage, and vegetable oils. Considering this list, many of these goods do not come in direct contact with recycled paperboard, suggesting alternative sources of MOH exposure. For the food groups listed that may be packaged in recycled paperboard, precautions can be taken to mitigate migrant exposure by utilizing functional barriers such as polypropylene, acrylate-coated polypropylene, PET, or aluminum barriers.
The panel also points to other packaging components, like inks applied to paper and board, additives and lubricants used in plastic manufacturing, polyolefins, adhesives, and wax coatings applied to packaging or directly to products, as sources of potential contamination. In addition, they identified mineral oils used in direct contact with products, such as release agents in bakery applications or dust control agents used to reduce the risk of explosions during the transport and storage of grains and rice, as other potential points of contamination. While many of these mineral oil applications utilize highly refined and processed grades of MOH approved for such uses, the primary concerns remain with the moderately processed and technical grades. Environmental sources such as particulate deposits from exhausts or smoking may also contribute to exposure levels, and for many products, MOH exposure may be completely unrelated to packaging migrants.
Within the packaging community, what can we do? Considering the information limitations, we can be proactive about collecting and providing additional data to help fill these information gaps. This can also help to inform packaging designers and engineers of potential materials that may be perceived as contaminants within the recycling stream. It can also be used to develop any necessary solutions and avoid making knee-jerk decisions that may lead to greater unknowns. Given the benefits associated with utilizing recycled content, we can continue to increase recycled material sourcing with the help of comprehensive research combined with design and manufacturing improvements.
As many of us already know, packaging provides us with the ability to safely deliver goods all over the world, provides essential consumer information and protection, has a substantial economic impact, and plays a vital role in our everyday lives. As complex packaging systems continue to expand the boundaries around product delivery, it is our responsibility to ensure that packaging approaches our sustainable vision and is beneficial, safe, and healthy for individuals and communities throughout its life cycle.
Eric DesRoberts is a project associate at GreenBlue’s Sustainable Packaging Coalition.
E-BOOK SPECIAL REPORT
44 Best Package Designs: 2015
Sign up to receive timely updates from our editors and download this e-book of our editors’ selections for most innovative package designs of the past year.