Fogg’s Chemical Supply & Recovery System takes chemical and water,
filters it, and reuses it. This dramatically reduces the environmental
impact at the same time it lowers the manufacturers operating costs.
The Chemical Supply & Recovery System will pre-mix your specific
chemical blend in a tank and then heat it to a prescribed temperature to
meet your sanitation requirements. It is capable of handling a variety
of chemical blends including acidic solutions. Depending on your
chemical blend, this process can be easily monitored and controlled by
the filler’s PLC to keep production running with confidence.
A typical user shows results like this:
If your filler is running at 120 bpm and your rinser is running at 10-14
gpm you will use approximately 14,400-20,160 gallons of sanitizing
fluid every 24 hours. Without a Chemical Supply & Recovery System,
it all goes down the drain. With a Fogg Chemical Supply & Recovery
System, you will only use 300 gallons of sanitizing fluid in 24 hours,
nearly eliminating the waste of water and chemical! That saves nearly
20,000 gallons of water per day and would fill up an Olympic sized
swimming pool every four days of operation! With these savings the
system pays for itself in 60-90 days!
You can integrate this Chemical Supply & Recovery System to any line
or have the system built directly into your next project. Each system
will be customized to meet your sanitation needs. Fogg’s proven
technology helps lower operating costs and provides the highest level of
reliability for your production lines.