“We took quantum leaps with this packaging” exhorts Alan Byrne senior packaging specialist Spalding Sports Worldwide Chicopee MA. Byrne says one-of-a-kind packaging highlights the distinctive ball and pump.
The box is converted by Inland Paperboard and Packaging (Indianapolis IN) which receives an 80-ga holographic biaxially oriented polypropylene/12-pt SBS substrate from Hazen Paper (Holyoke MA). Hazen receives the BOPP already metallized and embossed with the holographic imagery. Inland offset-prints the BOPP/SBS in nine colors plus overlacquer and then laminates it to single-face E-flute corrugated. As usual with Spalding graphics were handled by Colangelo Synergy Marketing (Darien CT).
Tight thermoform tolerences
The retractable pump positioned at the top front of the ball is covered by a thermoform molded of polyvinylchloride by Jay Packaging (Warwick RI). Byrne says tolerances were exceptionally tight for the thermoform’s small hexagonal cavity that surrounds the pump itself which is in its extended position about 1 1/2’’ above the ball surface.
If the thermoform fit is too loose the pump may retract before it reaches retail. Too tight and the packaging assembly operation becomes difficult at the Chicopee plant where Spalding operators use specially designed metal "fixtures" to assist ball loading into the box. The fixtures hold the flaps open and hold the pump in an extended position for placement of the thermoform. The pump is displayed via corner cutout on the box top both for consumers’ benefit and to keep it from being hidden by store shelves or when stacked.
Compared to Infusion's 20-month product development the six-month packaging development was a fast break.
Infusion’s official introduction date is May 2001 but Packaging World spotted it in early March at a Chicagoland sports store where it was selling for $5 less than the suggested price of $44.99.