Download this free, 114-page End-of-Line Equipment Playbook jam-packed with strategies for success, best practices, and pitfalls to avoid.  Learn more >>
 
This content was submitted directly to this Web site by the supplier.
Article |

Eriez: Palletizers/depalletizers lift and position layers of steel cans

Palletizers/depalletizers quickly, easily and smoothly remove an entire layer of steel cans at one time from a multilayer stack of cans without tumbling, jamming or damaging the cans. The magnet can also be used in reverse order to deposit a layer on a pallet.
Print Reprint
     

The extraordinary magnetic force of Eriez Palletizers/Depalletizers is supplied by Erium®-powered permanent magnets. Barring accidental damage to the head, there is always ample magnetic force for continuous can lifts.

The Eriez unit consists of a magnetic head encased in stainless steel, a stripper assembly with stripper head and a stainless steel stripper pan and a six-inch inch (152 mm) bore diameter air cylinder with a stroke of 1-1/2 inch (38 mm) and oversized rod for use with 80 psi (5.6 kg/sq cm) minimum and 150 psi (10.5 kg/sq cm) maximum air pressure.

In operation, the assembly is lowered (or the cans raised) until the stripper pan comes in contact with the cans to be handled. The magnetic head is then lowered to the holding position. The entire assembly is lifted (or the can layer support lowered) and the Palletizer/Depalletizer holds the cans securely as they are carried to the desired area. Finally, the magnetic head is raised and the cans are released.

Eriez’ Palletizers/Depalletizers can be built in various sizes to fit practically any can stack configuration.

Related Sponsored Content

E-BOOK SPECIAL REPORT
42 Best Package Designs
Sign up to receive timely updates from our editors and download this e-book consisting of our editors' picks of most notable package designs. Updated for 2014!
x

Newsletters

Don't miss intelligence crucial to your job and business!
Click on any newsletter to view a sample. Enter your email address below to sign up!
GENERAL INTEREST
PACKAGE DESIGN/DEVELOPMENT
Each newsletter ranges in frequency from once per month to a few times per month at most.

indicates a sponsored article that was submitted directly to this web site by the supplier, and was not handled by the PW editorial staff. Packaging World may share your contact information with our sponsors, as detailed in our Privacy Policy. Packaging World will not share your information with a sponsor whose content you have not reviewed.