- Contract Packaging
- Leaders in Packaging
This content was submitted directly to this Web site by the supplier.Article | November 15, 2012
Volkmann introduces Conweigh accurately weighs product in transfer to improve production.
Volkmann, Inc. introduced Conweigh — a weighing system to complement their VS and PPC series of vacuum conveyors. Conweigh can accurately weigh powders, granules, food particles, pellets, capsules, tablets and other bulk materials being transferred into and out of production processes via Volkmann conveyors. Conweigh registers weight within +/-1% or better, allowing adjustments to be made to avoid weight gains or losses during transfer and improve production outcomes.
Depending on the production application, Conweigh can work with one, three or four loadcells. In the most common case, weighing takes place at the vacuum receiver immediately prior to discharge into the process (gain-in-weight). Alternative systems can be employed under Bulk Bag Unloaders, hoppers or bag dump rip and tip stations at the feed point (loss-in-weight).
When used for weighing into vacuum receivers, Conweigh is available in two configurations:
• a single loadcell to accompany the VS or PPC200 and 250 Volkmann vacuum conveyor models
• three loadcells for the VS or PPC350 and 450 models.
When used in weighing of output from bulk bag unloaders, hoppers, and/or bag dump rip and tip stations, a fourth load cell configuration is available.
The Conweigh system can be instrumental in maintaining the accuracy of dosing processes by establishing a controlled material release regimen via the Multijector® Vacuum pump, weighing the material discharged after the pump is deactivated and then continuing with dosing until the target value is reached.
The system uses a three-step weighing process to eliminate errors that can occur due to the build up of material on filters, and other system parts. The +/-1% accuracy is a function of the application, batch size, installation and process, but can often exceed this number after testing and adjustments.
Conweigh includes options for recipe management via the pic controller and HMI and is available in 110v or 240v options. In can be set up to interface with SCADA and other data collection systems.
Related Sponsored Content
E-BOOK SPECIAL REPORT
44 Best Package Designs: 2015
Sign up to receive timely updates from our editors and download this e-book of our editors’ selections for most innovative package designs of the past year.