Download this free, 80-page Food Safety Playbook jam-packed with strategies for success, best practices, how to ensure compliance with FSMA, and pitfalls to avoid. Written specifically from a packaging perspective
Learn more
Article |

Orval Kent assures food safety with X-ray inspection

Orval Kent, one of the largest producers of prepared salads for foodservice customers in North America, takes food safety very seriously.
FILED IN:  Machinery  > Inspection  > X-ray

At their plant in Linares, Mexico, where fruit salads are made, every package passes through an x-ray inspection system prior to being shipped.  To maximize detection sensitivity and uptime, they recently replaced their older x-ray system with a PowerChek x-ray system from Mettler-Toledo Safeline.        

“For customers like Costco, Sysco, airline companies and others, maintaining the highest product quality and food safety is critical.  These customers rely on Orval Kent and we rely on our Safeline x-ray system.  The machine allows us to guarantee our customers will not receive contaminants in our products,” said Adalberto Salce, Plant Engineer at Orval Kent’s Linares facility. 

Orval Kent produces over 80 different types of fruit salads, which are packaged into 4 lb and 8 lb PET jars and 1, 3 and 5 lb flexible pouches on five filling lines at the Linares plant.  All products from the five filling lines go to a single shipping line where they are inspected by the PowerChek x-ray system prior to case packing.

Related Sponsored Content

“Food safety is a hot issue today.  Consumers are more aware of the consequences and producers need to comply with higher expectations.  At Orval Kent, we produce salads that are as fresh as possible while being as safe as possible,” noted Salce.  “The Safeline x-ray system helps us achieve the highest product quality.  It detects metal, glass, plastic and other types of foreign material and removes contaminated product from the production line.”

"We considered metal detectors but the x-ray system was the better choice for us for several reasons," explained Salce.  "The x-ray system enables us to inspect for non-metal contaminants such as glass too, which allows us to achieve the highest specifications.  It offers consistent inspection even with the natural variations in the conductivity of our products.  Since the x-ray system can be used after we've sealed the PET jars with foil, we can inspect at the end of the line where there is no risk of subsequent contamination."

“The PowerChek x-ray system is one of the nicest machines I’ve ever seen.  It is very easy to use.  Changeover is accomplished in about 30 seconds on the color touchscreen control panel – no mechanical changes are needed.  Calibration is easy because it’s fully automated,” said Salce.  “The system is password protected.  Operators, supervisors and engineers all have different levels of access so we can be sure it’s set up properly.”

Using a vertical single beam, an electronically controlled low-powered x-ray generator and proprietary data and image analysis software, PowerChek identifies objects that are a different density than the product it’s inspecting.  It the system detects a foreign object, it automatically saves the image, and the package is removed from the production line.  At Orval Kent, every rejected container goes to the quality control lab for further inspection so the company can quickly determine if there is a contamination problem in the plant that needs to be corrected.


“Compared to our old x-ray system, the PowerChek is more sensitive and more reliable,” noted Salce.  “We test it at the beginning of every production day and after every changeover, which is typically four or five times a day.  In the 18 months that we’ve had it, it’s never failed a test and we’ve had no unplanned downtime.  This system helps us guarantee our customers receive the highest product quality and food safety.”

E-Book Special Report
Total Cost of Ownership
Sign up to receive timely updates from our editors and download this E-Book Special Report to learn how to calculate the true Total Cost of Ownership (TCO) of your packaging machinery.


Don't miss intelligence crucial to your job and business!
Click on any newsletter to view a sample. Enter your email address below to sign up!
Each newsletter ranges in frequency from once per month to a few times per month at most.