Download this free, 128-page Primary Packaging Line Equipment Playbook jam-packed with strategies for success, best practices, and pitfalls to avoid. Learn more >>
This content was submitted directly to this Web site by the supplier.
Article |

Ophir Photonics: Laser beam profiling camera

Ophir Photonics, a Newport Corporation brand, announces the Pyrocam; IVs, the newest member of the Pyrocam family of pyroelectric laser beam profiling cameras.
Print Reprint
FILED IN:  Machinery  > Inspection
     

The Pyrocam IVs is the next generation of the popular Pyrocam III. It features a more sensitive, 160 x 160 pixel image array that can profile beams up to ½-inch (12.8 mm) without the need for reduction optics. The Pyrocam IVs measures both pulsed and CW (continuous wave) lasers, from 13 to 355 nm and 1.06 to >3000 µm. An integral focal plane chopper is included for CW beams and thermal imaging.

"The Pyrocam cameras are the only way to see 3D views of long wavelength lasers, CO2 and beyond," said Gary Wagner, General Manager (U.S.), Ophir Photonics. "The increased sensitivity and longer wavelength range of the Pyrocam IVs make it ideal for the burgeoning terahertz lasers market. Terahertz laser power is increasing in leaps and bounds for a wide range of applications, from chemical analysis and security scanning to medical imaging and telecommunications."

The Pyrocam IVs allows you to see the beam for dynamic alignment and proper operation of CO2 and telecom NIR lasers, as well as other infrared sources out to the Far IR THz range. For high-speed applications, it includes an interface to GigE (Gigabit Ethernet) cameras. A 14-bit A/D converter provides reliable measurement and analysis of both large signals and low level signals in the wings of the laser beam. A signal to noise ratio of 1000:1 means beams of 30 mW/cm2 are easily visible.

The Pyrocam IVs ships with BeamGage®, the company's advanced laser beam analysis software. This provides 2D and 3D viewing of beams and includes the algorithms and calculations needed to make accurate, ISO approved, NIST-traceable beam measurements. Measurements include total and peak power/energy, peak and centroid location, beam diameter, and X/Y knife edge beam widths. The patented Ultracal® baseline algorithm in BeamGage® eliminates background noise, ensuring the highest degree of measurement accuracy.

Related Sponsored Content

E-BOOK SPECIAL REPORT
42 Best Package Designs
Sign up to receive timely updates from our editors and download this e-book consisting of our editors' picks of most notable package designs. Updated for 2014!
x

Newsletters

Don't miss intelligence crucial to your job and business!
Click on any newsletter to view a sample. Enter your email address below to sign up!
GENERAL INTEREST
PACKAGE DESIGN/DEVELOPMENT
Each newsletter ranges in frequency from once per month to a few times per month at most.

indicates a sponsored article that was submitted directly to this web site by the supplier, and was not handled by the PW editorial staff. Packaging World may share your contact information with our sponsors, as detailed in our Privacy Policy. Packaging World will not share your information with a sponsor whose content you have not reviewed.