- Contract Packaging
- Leaders in Packaging
- Calendar of Events
Article | May 31, 2012
Nine best practices for selecting capping equipment
There are few key things to keep in mind when buying and specifying capping machinery.
1. Know your closure. The tip we heard the most, from both suppliers and end users, was that you must understand the tolerance of the closure itself and then marry the material tolerance to the machine tolerance. You must completely understand all the geometry, tolerances, and measurements of your closures before you order a machine. For example: What sort of pressure does a snap-on closure take? With a screw-top closure, you might be able to use 20 times more force, but how many times do you have to rotate it? Often, packagers don’t take into account the type of closure and balance the application torque and removal torque required by the consumer. Induction sealers add another variable, as they may loosen caps, requiring the addition of a retorquer. Additionally, every closure has a decay time on the removal torque; you need to know the decay time, because it may loosen on the shelf. Know this information and share it with your supplier.
2. Consider both the consumer and the machine. Because the cap has to interface with both. Consider the size of the bottle opening from both a filling and evacuation standpoint. Also evaluate whether to use a single-closure assembly versus a two- or three-piece cap assembly. The geometry of the package must be considered first, and then you should explore the type of feeding system you need to deliver the closures to the capping machine.
Related Sponsored Content
3. How will the closure design interface with the machine function? Before you consider centrifugal sorting bowls, you must know the height and diameter of the part versus the length of the part, as well as the weight bias, to determine if it will sort well, or at all. Other considerations include: Do the sidewalls have paper or not? This makes it more unstable in handling. You must look at this in a very granular fashion; you must know what the natural tendency of a part is before you toss it into a sorting bowl. It’s critical to know how the cap design will interface with the machine function. And you have to know that before you apply any sort of force to it. You have to find a way to differentiate shapes in the sorting bowl. Once you know the natural tendencies of a part, you can assist those tendencies through the design of your machinery, and you will achieve more reliable operation when capping and handling. One philosophy is to permit machine function to drive closure design—in other words, make sure that the design of the cap is compatible with what’s typically available in the way of unscrambling and orientation equipment.
4. Consider future closure flexibility. Like any other packaging machine, try to anticipate future needs. Capping machines may need to be able to deal with a variety of different types of closures over time. Over the years, cap designs and applications have become increasingly complex: For example, spray-through caps must be oriented with the graphics on the container.
5. Rotary capper considerations. When looking at rotary machines, examine the number of heads and infeed method (starwheels or screws). A key element to look at is how the cap is applied. Servo-driven chuck applications permit easy changeover to different closure styles. Closure pickup is critical, as is chuck handling. Look at the capper’s centering mechanism and any anti-rotation devices to ensure proper closure placement.
6. The need for speed. Think about how many heads are required to achieve your current line speed, and make sure you have the ability to add heads later for higher-speed applications.
7. Examine container handling and stabilizing. For some lighter-weight plastic bottles, you’ll need to look at the machine to assess how well it holds the container tightly in place during the capping application and torquing to assure a good seal, especially for food products.
8. Test tolerance variances. Look at what your container and closure suppliers are providing in terms of both the widest and narrowest tolerances. Test the opposite extremes with one another and see how the machine handles it. You’ll obtain valuable insight into how flexible the machine will be with borderline materials.
9. Test known bad inputs. Deliberately feed in the wrong container and the wrong closure. This is known as induced failure testing. This is part of trying to simulate what happens on the third shift, when operators may be tired and not as aware of their surroundings. What happens if material is loaded in the wrong way? If operators load the wrong caps? Will that break the capping machinery? Better to find out before you buy.
Liked this article? Download the entire playbook here.
E-BOOK SPECIAL REPORT
42 Best Package Designs
Sign up to receive timely updates from our editors and download this e-book consisting of our editors' picks of most notable package designs. Updated for 2014!