Download this free, 80-page Food Safety Playbook jam-packed with strategies for success, best practices, how to ensure compliance with FSMA, and pitfalls to avoid. Written specifically from a packaging perspective
Learn more
Article |

Capsules winning out over cork?

As problems with ‘cork taint’ continue to plague the wine industry, Kendall-Jackson is expanding its use of ROPP aluminum capsules.
FILED IN:  Machinery  > Filling/sealing  > Capping
ROTARY CAPPER. This eight-head capper feeds ROPP 
closures from a hopper onto the bottles and uses a pressure block inside each Capsules winning out over cork?

Director of packaging Michael Gribben at Kendall-Jackson Winery is a big believer in screw-cap closures for wine.

“The wine never goes bad” he says. “On the other hand anywhere from three to ten percent of bottles closed with natural cork go bad depending on how the bottles are stored and the length of time they’re stored.”

Kendall-Jackson based in Fulton CA sources its screw-cap closures from both Alcan Capsules of California ( and G-3 Enterprises ( The closures consist of an aluminum alloy and a liner with as many as seven layers including polyethylene and polyvinylidene chloride. When asked about the cost of the screw cap compared to the traditional cork plus capsule Gribben said it’s about a wash.

When Kendall-Jackson first began using screw-cap closures it did so by relying on an outside contractor. Wine was shipped in tanks to the contractor for filling and capping. But within a year it was time for a change.

Related Sponsored Content

“Based on what it cost us to have it done outside and the way we saw our future shaping up we decided it was time to bring capping in-house” says Gribben. “We looked at a lot of capping machines too. Quality price number of heads delivery time service parts changeover time—we carefully considered them all.”

The research Gribben describes led to the installation about a year ago of a Fowler ( eight-head CA/8360 rotary ROPP capper. The “ROPP” of course stands for “roll-on pilfer-proof.” The aluminum capsules are loaded into a hopper that feeds them first through orientation and then placement over a bottle neck. The system uses a pressure block inside each head to form the unthreaded capsule around the threads of the glass bottle. To remove the closure the consumer simply twists it off. Now threaded it can be returned to the bottle easily as well.

Though the Fowler machine has a rated speed of 320 bottles/min Kendall-Jackson runs it in the range of 180/min. Says Gribben “It’s the Cadillac of the industry.”


Also installed at Kendall-Jackson just ahead of the Fowler unit was a liquid nitrogen dosing system from Cryotech Intl.( The dose of nitrogen drives out potentially harmful oxygen in the headspace.

Now used on four varietals in either 375- or 750-mL sizes the screw-cap closures are gaining in popular. But Gribben admits that snob appeal will probably never permit them to be universally popular. All the same Kendall-Jackson is looking at additional brands as candidates for the cork-to-capsule transition.

E-Book Special Report
Total Cost of Ownership
Sign up to receive timely updates from our editors and download this E-Book Special Report to learn how to calculate the true Total Cost of Ownership (TCO) of your packaging machinery.


Don't miss intelligence crucial to your job and business!
Click on any newsletter to view a sample. Enter your email address below to sign up!
Each newsletter ranges in frequency from once per month to a few times per month at most.