Download this free, 114-page End-of-Line Equipment Playbook jam-packed with strategies for success, best practices, and pitfalls to avoid.  Learn more >>
Article |

A vision for low-cost inspection

Access Business Group, the manufacturing arm for Amway, upgrades cosmetics packaging with new low-cost vision sensors that confirm literature insertion and label presence.
Print Reprint
FILED IN:  Controls  > Strategy
     

Ada MI-based Access Business Group Inc. uses economical vision sensors to bring its cosmetics operations new levels of speed accuracy and automation. Access and sister company Amway Corp. are subsidiaries of Alticor Inc. Effective Oct. 24 2000 Access is the new name for the research and development manufacturing and logistics operations for Amway products.

Access uses F30 binary vision sensors from Omron Electronics (Schaumburg IL) to confirm the placement of literature into cartons on three lines. On another cartoner’s infeed the F30 unit confirms label presence on lipstick and mascara tubes.

“Sensors are cheaper smarter and more user-friendly than ever before” explains Bob Farmer senior cosmetics facility engineer.

The units conform to Farmer’s purchasing philosophy of “The Three T’s.” “They must require no time no talent and no tools....they can’t be too complicated” he sums up. Through a team approach Farmer led the automation upgrades within the cosmetics operations.

Related Sponsored Content

Insertion confirmation

One key area where vision sensors have helped make Access’ automation upgrades viable was with cartoners which were upgraded from manual literature insertion.

“In the past we’ve used four or five workers to place the literature into cartons but for drugs and cosmetics we’ve gotten away from that as it’s crucial to place the literature and then confirm it with high accuracy” says Farmer. “Those lines are now automated.”

Thus far Access has installed the 510x492 pixel vision sensors on three German-made IWK (Fairfield NJ) cartoners to check product literature as it is pushed into the carton.

For example in fall ’99 Access whose operations were then under the name Amway Corp. began using Omron’s mid-range F30 vision sensor on an IWK CP-80 cartoner. It had been upgraded earlier in the year with a German-made automatic literature insertion unit. Farmer says literature is included in about 90% of the cartoned products. The upgrade supplanted the visual confirmation that went along with manual insertion. The company needed to automate inspection which Farmer says was a “real challenge” the biggest of which centered on figuring out where to locate the sensor (see sidebar). “At a rate of up to 80 cartons per minute there’s only a split second to check the literature as it’s pushed into the carton” he notes. Farmer credits senior set-up engineer Bernie Waring for his efforts in the upgrade.

“The sensor must be versatile enough to read a range of folded literature from thick inserts to some as thin as rice paper” says Farmer. And in various hues too: Subtle literature hues interpreted successfully by the vision sensor in gray scale include off-white and even a yellowish-gold paper.

Access now has 100% inspection of every single carton for literature presence. When asked about the viability of the system “the proof is in complaints from the field and there have been none” Farmer replies. Before when literature insertion was done manually the company would occasionally receive a complaint about the lack of an insert Packaging World is told.

More than lipstick service

Access also uses an F30 vision sensor for label presence installed this past summer on the infeed to an IWK cartoner for tubes of lipstick and mascara. A photocell was not practical for this application because the company wanted to do more than detect the presence of a label Farmer says; it also wanted to check placement accuracy. He says they set the parameters for placement tightly therefore they receive frequent false rejects. “It’s a fail-safe system” explains Farmer “as we even reject ones that are borderline good.” Farmer reports that they reject several products out of every hundred. Rejected products are then manually inspected.

The F30’s sensing head is mounted in a position beyond where a pressure-sensitive label is applied to the bottom of the lipstick tube. The circular product-identifying label measures 7/16’’ in dia. PW observed mascara being run with gold labels preprinted in black ink and embossed online with a production code. Some lipstick labels are even smaller just 3/8’’ in diameter Farmer says.

The sensing head is aimed at a small opening in the inclined metal infeed that holds the tubes just before they drop into a cartoner flight. The label can be seen through the opening.

The self-contained unit includes camera light source lens and controller. It carries a list price of $2 to which Access added a 9’’ black-and-white monitor. The system offers 256-gray scale level inspection. The adjustable shutter camera has image capture speeds to 1/3000 of a second. It inspects labels on tube bottoms as they roll by at rates between 35 and 40/min. Those without a label are then tracked by the cartoner’s PLC and rejected downstream.

Access’ continuing vision for the future includes more of these low-cost vision sensors.

See sidebar to this article: A detailed look

Comments(0)

Add new comment

E-BOOK SPECIAL REPORT
42 Best Package Designs
Sign up to receive timely updates from our editors and download this e-book consisting of our editors' picks of most notable package designs. Updated for 2014!
x

Newsletters

Don't miss intelligence crucial to your job and business!
Click on any newsletter to view a sample. Enter your email address below to sign up!
GENERAL INTEREST
PACKAGE DESIGN/DEVELOPMENT
Each newsletter ranges in frequency from once per month to a few times per month at most.