IP20 Ethernet Switch
Controls Product Brief
| May 21, 2013

Ethernet switches

TURCK extends its in-cabinet Ethernet switches with a new multimode fiber optic port unit for reliable, fast performance in process and factory automation environments requiring conversion from fiber to copper media.
[CustomContent/LeadGenCampaign/SupplierSubmitted]
Controls Product Brief
| April 12, 2013

Diagnostic power conditioner backplane provides advanced monitoring

Turck’s Diagnostic Power Conditioner (DPC) Backplane for FOUNDATION Fieldbus H1 segments provides up to four segments with redundant power and 800mA/segment.
6-port M12 passive junction box
Controls Product Brief
| March 18, 2013

Passive junction box

TURCK introduces a new 6-port M12 passive junction box, designed to easily integrate multiple devices into a single unit.
[CustomContent/LeadGenCampaign/SupplierSubmitted]
BL Compact stainless steel I/O solution
Controls Product Brief
| March 6, 2013

Stainless steel I/O solution

TURCK announces the company’s innovative I/O solution, BL Compact, is now available in a stainless steel model.
[CustomContent/LeadGenCampaign/SupplierSubmitted]
Industrial Ethernet Overview
Controls Product Brief
| February 20, 2013

Multiprotocol technology simplifies industrial Ethernet for Distributed I/O

Delivering a reliable solution across hardware platforms, this unique technology allows users to employ one device for three protocols—EtherNet/IP™, Modbus™ TCP/IP and PROFINET®—creating easier integration with host control systems.
[CustomContent/LeadGenCampaign/SupplierSubmitted]
7/8-16UN minifast
Controls Product Brief
| January 31, 2013

Splitters and tees for DeviceNet applications

TURCK introduces new 7/8-16UN minifast tees, splitters and in-line diagnostic devices, designed for use in DeviceNet applications, including CAN networks and mobile equipment.
[CustomContent/LeadGenCampaign/SupplierSubmitted]
Controls Product Brief
| October 8, 2012

Ethernet gateway

TURCK’s BL67 Ethernet Gateway for Ethernet/IP and Modbus TCP/IP provides a reliable communication solution for on-machine, modular I/O applications, and is suitable for use in environments where conditions may not be conducive to traditional I/O.
Controls Product Brief
| July 2, 2012

Rotary single axis inclinometer

With a monitoring range of 360 degrees, TURCK’s new rotary single axis inclinometer expands its dual axis CANopen inclinometer offering for angular tilt detection.
Controls Product Brief
| May 7, 2012

24V-switching power supplies

Designed to efficiently convert AC to DC, Turck’s new 24VDC Power Supply family provides safety extra-low voltage (SELV), according to EN 60950, and is suitable for the 24V supply of power to equipment and interface modules of the Turck series IM, IMS and IMC.
Controls Product Brief
| March 13, 2012

Inductive sensor for harsh washdown applications

Designed for applications that require frequent cleaning with chemicals found in food and beverage applications or where the sensor is exposed to wet environments, TURCK’s Q42 long-range inductive proximity sensor using FDA rated materials is available in a top-facing model and front-facing model.
Controls Product Brief
| November 16, 2011

Ethernet field wireable connector features bayonet-style mating for harsh environments

The IP 67 Bayonet Style RJ45/Ethernet field wireable connector from Turck, an extension their RJ45 connector line, provides protection in washdown applications or in areas of high impact.
Controls Product Brief
| May 12, 2011

Gateways for EtherNet/IP£ and Modbus TCP

Turck’s BL20 Economy gateways for EtherNet/IPTM and Modbus TCP provide a flexible in-the-cabinet system for distributed I/O, and can be paired with a broad range of I/O slices to suit most application’s communications and transparency requirements.
Controls Product Brief
| May 4, 2011

Rotary inductive sensor

Turck’s rotary inductive sensors provide 360-degree angular measurement for outdoor applications. 
Controls Product Brief
| January 3, 2011

Cylinder position sensors

TURCK’s line of BIM-UNR magnetic cylinder position sensors, designed to mount within C-groove cylinders with no accessories required, has been expanded to include sensors with NPN outputs.
 

Controls Product Brief
| October 12, 2010

MEMS inclinometers

The TURCK Q42 inclinometer is a dual axis inclinometer sensor with a CANopen interface for measuring angular tilt in reference to gravity. 
Controls Product Brief
| September 8, 2010

Adapters

Turck’s M12 adapters may be used to connect incompatible round connectors quickly and easily.
Controls Product Brief
| August 23, 2010

Connectivity catalog of NFPA 79 compliant wiring products

TURCK’s powerfast˙ Connectivity Catalog contains their complete line of powerfast products including cordsets, connectors, tees, splitters and receptacles rated for up to 30 amps and 600 volts.
Controls Product Brief
| August 7, 2010

Ethernet cables

TURCK’s Cat 5e Ethernet cables are gigabit capable and incorporate flexlife® high-flex cable jackets.
Turck_inclinometer
Controls Product Brief
| May 4, 2010

Single axis MEMS inclinometer sensor

TURCK's single axis inclinometer sensor solves unique feedback requirements for applications such as leveling platforms, controlling a dancer or controlling tilt angle in a diverse array of industries.
Turck_linear_sensor
Controls Product Brief
| May 3, 2010

Linear position sensors

Turck’s LI-Q25 series linear position sensors replace magnetostrictive and potentiometer devices to deliver precise, repeatable measurements in metal processing machines, rolling mills or injection molding machines.
Controls Product Brief
| March 31, 2010

Low-profile dual cylinder position sensor

The BIM-UNT line of compact cylinder position sensors from TURCK has been expanded to include a dual sensor for detecting long and short stroke cylinders in stamping, sorting, conveying, and other material handling applications.
Machine Product Brief
| March 9, 2010

Analog+ proximity sensors

Turck’s analog+ proximity sensors are enhanced to differentiate between varying types of metal during detection-independent of their distance from the sensor.
Machine Product Brief
| February 6, 2010

Sensor

TURCK’s Q08 uprox® + factor 1 sensor is designed to detect steel, stainless steel, copper, brass and aluminum at the same rated sensing distance—up to 8 mm sensing range.
Turck_connector
Controls Product Brief
| January 28, 2010

Modular wiring system

TURCK’s D-Size (1 3/8 in.) Powerfast™ modular wiring system is designed to handle high-current applications for machine power distribution and motor control.
Turck_RFID_S
Controls Product Brief
| January 28, 2010

RFID-S Slice for I/O system

Turck’s BL67 modular distributed I/O system is now equipped with a Simple RFID (RFID-S) slice that is compatible with their BL ident RFID product line.
Materials Product Brief
| January 11, 2010

Single Segment Redundant Backplane for FOUNDATION™ Fieldbus H1 segments

TURCK Inc. expanded its Diagnostic Power Conditioner (DPC) system with a Single Segment Redundant Backplane that can combine two isolated power supply modules into one FOUNDATION™ fieldbus segment.
[CustomContent/LeadGenCampaign/SupplierSubmitted]
Machine Product Brief
| January 7, 2010

Snap track cable tray

Turck’s Quick Disconnect Technology is incorporated in TechLine Manufacturing’s cable tray system for electrical contractors.
Machine Product Brief
| November 25, 2009

TURCK's BL Compact family collects analog and digital signals at the source

TURCK's BL Compact system is a revolutionary modular I/O solution for collecting a variety of signals in a single, rugged node on a network.
[CustomContent/LeadGenCampaign/SupplierSubmitted]
Machine Product Brief
| November 23, 2009

Analog+ proximity sensors

Turck's analog+ proximity sensors are enhanced to differentiate between varying types of metal during detection—independent of their distance from the sensor.
Machine Product Brief
| October 4, 2009

Interface modules

To simplify device set-up and installation time, Turck’s interface modules (IM) can be programmed via a PC or on-board push buttons using FDT/DTM software, along with PACTware.
Machine Product Brief
| September 4, 2009

Sensor for manufacturing

Turck’s IP 68 rated, 80 mm rectangular Ni75U-Q80 uprox®+ factor 1 sensor is specifically designed for sensing small targets, especially those on automotive skids.
Machine Product Brief
| May 4, 2009

Pressure sensor

TURCK’s PT4400 pressure sensor uses a media isolated stainless steel diaphragm for use in pneumatics, water management, hydrogen storage, hydraulic systems, oil and gas, HVAC/R and industrial OEM equipment.
Machine Product Brief
| May 4, 2009

Modular I/O system

TURCK’s BL20 modular I/O system expands their BL ident RFID product portfolio with the release of a Simple RFID (RFID-S) slice.
Machine Product Brief
| April 4, 2009

Connectors

Turck has expanded its 1 1/8-in. minifast® connector line to handle more applications with the addition of the 19-pin connector.
Machine Product Brief
| January 31, 2009

Magnetic field sensor

Turck’s compact WIM45 magnetic field sensor provides a direct analog output for determining the position of a piston magnet on all types of pneumatic cylinders.
Controls Product Brief
| November 2, 2008

Sensors for plastic detection

Turck introduces the BCC capacitive sensor series designed to provide accurate level detection in the plastic industry.
Controls Product Brief
| June 2, 2008

Magnetic absolute encoders

Turck has introduced new Sendix® encoders with 12-bit analog and 14-big CANopen outputs designed for applications requiring rugged, high-resolution encoders.
Controls Product Brief
| February 4, 2008

Junction box

Turck’s new M12 eurofast® junction box saves installation time by mounting 1 junction box instead of punching 8 receptacle holes for through-panel signal connections.
Controls Product Brief
| December 7, 2007

Ethernet/IP gateways

New EtherNet/IP piconet® gateways from Turck are available with either 8 M8 picofast® or 4 M12 eurofast® connectors, and they provide 4 points of digital I/O.
Controls Product Brief
| November 7, 2007

Cylinder position sensors

Turck has introduced the BIM-UNT, a universal magnetic field sensor that detects the position of a piston on standard pneumatic cylinders.
Machine Product Brief
| October 17, 2007

High-density DeviceNet Stations

The vendor is expanding its line of DeviceNet I/O stations with the addition of FDN20 high density I/O stations for IP 20 applications. 
Machine Product Brief
| September 5, 2007

High-flex cable

After continued testing of its flexlife®-10, high-flex cable that guaranteed 10 million cycles of
Controls Product Brief
| July 12, 2007

Modular RFID, built-in I/O

Turck introduces BLident, the world’s first modular RFID system with built-in I/O capability.
Controls Product Brief
| January 10, 2007

Relay flexibility

Turck offers the new C12 interfacer™ relay, a 2-pole changeover contact relay used for linking PC or PLC logic to machine operation.
Controls Product Brief
| December 18, 2006

Network I/O Catalog

Turck's new Network I/O catalog combines 9 other catalogs and brochures into a single comprehensive compilation of the company's network I/O products.
Controls Product Brief
| November 5, 2006

Motor starter modules

New BL20 xStart motor starter modules from Turck allow 3-phase motor control to be connected to the same rack as standard I/O.
Controls Product Brief
| July 31, 2006

Ultrasonic Sensor

Turck has announced that levelprox, its non-invasive ultrasonic sensor that proves point-level detection of liquids through metal containers, now has FM approval.
Controls Product Brief
| June 30, 2006

Low-Profile Junction Box

New low-profile M12 eurofast junction boxes from Turck provide efficiency and versatility for quick-disconnect wiring consolidation. The compact junction boxes are available in 4- or 8-port with single or dual output.
Controls Product Brief
| April 30, 2004

Analog sensors

Turck expands its line of inductive analog sensors with new housing styles and functions. Major cylindrical styles (12-, 18-, and 30-mm) are now available with an extended linear sensing range, up to 100% longer, in the analog+ series.
Controls Product Brief
| May 31, 2003

Absolute encoders

Turck’s Kübler by Turck 5862/82 Line of absolute multiturn encoders are flexible, configurable, tough, and low profile. Patented Intelligent Sensing Technology delivers programmability and accuracy in high-abuse applications.
Controls Product Brief
| February 28, 2003

High-temperature sensors

Turck (Minneapolis, MN) has introduced a new line of high-temperature sensors ranging to 160°C (320°F). Sensors in brass barrels sense to 100°C (212°F).
Machine Product Brief
| July 31, 2001

Programmable pressure sensors

Turck (Minneapolis, MN) offers a complete new line of fully programmable pressure sensors. Reliable, solid state devices available with a variety of options for most pressure analysis applications, these robust devices operate on the piezoresistive principle.
Controls Product Brief
| September 30, 2000

Proximity sensor

Q10S Proximity Sensor from Turck (Plymouth, MN) offers improved mounting flexibility and a more visible LED. Device measures 10.2mm x 16.0mm x 28mm (.401”x0.629”x1.1), allowing it to fit and function in confined areas.
Controls Product Brief
| April 30, 1999

Proximity sensor

Turck's (Plymouth, MN) Bi50-CP80 long-range proximity sensor offers a range of up to 50 mm. It functions even when embedded in steel to protect against impact.
Controls Product Brief
| April 30, 1997

Ultrasonic sensor

Turck (Minneapolis, MN) has introduced the Q30, a low-cost ultrasonic sensor. It was designed with a single high-performance transducer that is used as both the emitter and receiver.
Controls Product Brief
| September 30, 1996

Device level buses

TURCK Inc. (Minneapolis, MN) has released a tutorial that provides an overview of device level "buses," which are the communication systems that link electrical components in a packaging line.
Controls Product Brief
| August 31, 1996

Input/output module

Turck (Minneapolis, MN) has announced the busstop(TM) input/output module for DeviceNet(TM) networks. The module is designed to connect standard input/output devices to a "bus," which is the communications system linking electrical components in a packaging line.