National Adhesives introduces VelocityP3 33-711A and 33-711B multipurpose noncontact extrusion adhesives for simple and moderate substrate adhesion challenges in folding carton and glued lap applications.
From National Adhesives comes new VelocityP3™ 33-711C, a solvent-free, multipurpose adhesive that offers excellent adhesion and above-average heat- and cold-resistance for most wheel and bottom pot folding-carton and glued-lap applications.
National Adhesives has introduced a new high-performance resin adhesive product line that can help laminators attain maximum line speeds and reduce adhesive usage and production costs for P-O-P and other types of laminating applications.
National Adhesives offers Easy-Pac™ 200ºF packaging hot melt, developed for case and carton sealing applications in food processing, beverage, personal care, household and consumer electronics, or other products in volume.
A new brochure provides easy-to-follow information about resin, dextrin, and hybrid-formulation adhesives from National Adhesives. The 6-page, full-color, pocket-folder brochure includes guidelines for selecting products for specific applications, as well as recommendations for resolving various finish problems.
National Adhesives offers a new selector guide on solution rubber p-s adhesives, providing information on Duro-Tak® adhesives. Explains properties of Duro-Tak adhesives, including products designed for industrial tapes, removable p-s adhesives for skin care, and other applications.
New literature from National Starch & Chemical describes characteristics of a series of liquid performance additives for corrugators. Additives are said to improve tack and water resistance in the finished board, in addition to delivering greater speed and runnability.
National Starch and Chemical (Bridgewater, NJ) offers two new specialty adhesives for laminating that improve hold-out when they are aerated. Aerobond™ 32-192A is said to minimize moisture and cost as well as permit high-productivity processing for laminators of paper products.
National Starch & Chemical (Bridgewater, NJ) has published “Foamed Adhesives Quicken Flow of Operations.” It discusses how micro-sized bubbles injected into adhesives can improve properties, paper product quality, and machine speed for converters.
National Starch (Bridgewater, NJ) has published a brochure describing the Duro-Flex® line of flexible laminating adhesives. Described are Duro-Flex SB solvent-based adhesives that exhibit high chemical and heat resistance suitable for high-volume snack packaging; Duro-Flex WB waterborne adhesives having a broad range of performance capabilities; and Duro-Flex SF solvent-free solid adhesives that offer special features to enhance productivity and end-use performance.
National Starch and Chemical (Bridgewater, NJ) presents literature describing the characteristics of Eco-Foam®, a starch-based loose fill packaging material for cushioning products during handling and shipping.
The Aerobond™ adhesive foaming system from National Starch (Bridgewater, NJ) includes 32-151A resin emulsion adhesive and applicator. The system uses little water to foam the adhesive, resulting in good lay-flat quality, fast drying, and dimensional stability in converting applications.
A hot melt, p-s adhesive is now available from National Starch & Chemical (Bridgewater, NJ). Duro-Tak® 34-416A adhesive shows high loop tack, resistance to peel and shear, and no edge ooze or bleed-through after 1 week at 120?F.
Ultra-Cure(TM) 2000 is a hot melt p-s adhesive that cures instantly upon exposure to UV radiation. Made by National Starch & Chemical (Bridgewater, NJ), Ultra-Cure 2000 is said to provide tack and peel strength similar to a conventional hot melt p-s adhesive, yet maintains a bond at elevated temperatures after curing.
Core-Tite® 32-1309 emulsion adhesive, from National Starch and Chemical Co. (Bridgewater, NJ), provides strong wet tack, versatility and adhesion to board stocks with surfaces that typically present difficulty for conventional glue.
Designed for case and carton sealing of food and consumer products, Cool-Lok(TM) HP 34-2125 low-temperature, hot melt adhesive from National Starch & Chemical (Bridgewater, NJ) has a set speed of 1 sec and is light-colored.
A solventless polyurethane laminating adhesive system is described in a new technical bulletin from National Starch and Chemical (Bridgewater, NJ). The two-component system, a Duro-Lam® 37-8600 laminating adhesive with Duro-Lam® 37-8500 co-reactant, is recommended for treated polyolefins, polyesters, metallized films, aluminum foil and PVDC-coated films used to package food products such as meats, cheeses, frozen foods, snack foods, confections and fresh produce.
A new laminating adhesive for bags, designated 33-4066, is available from National Starch & Chemical (Bridgewater, NJ). The p-s emulsion adhesive provides good wet tack and adhesion to difficult surfaces like polyolefins.
National Starch & Chemical Co. (Bridgewater, NJ) has released a brochure on its new hot melt adhesive, Versa-Melt® L. Describes the adhesive's ability to bond label material to any bottle or can substrate.