Machine Product Brief
| February 28, 2013

Water vapor measurement instrument

Designed to measure the water vapor transmission rate (WVTR) of ultra-high barrier films, Mocon’s new generation AQUATRAN Model 2 WVTR measurement instrument targets commercial or developmental ultra-high barrier structures, including flexible films for organic light-emitting display (OLED), solar, and similar demanding applications.
Machine Product Brief
| December 17, 2012

Oxygen test system

Three new accessories for Mocon’s OpTech oxygen test system for food and pharmaceutical applications are now available: a portability kit; a needle attachment with fluorescing sensor material applied to its tip; and the new ImPULSE sensor that works with opaque materials as well as with retort applications.
Machine Product Brief
| September 13, 2012

Bacterial measurement for dairy products

MOCON’s new GreenLight oxygen-depleting technology for measuring aerobic bacterial levels can provide results for raw milk between 30 minutes and five hours, compared to 48- to 72-hours required by the traditional, agar-based, standard plate count method.
Machine Product Brief
| May 4, 2012

Testing system measures CO2, O2

MOCON’s MultiCheck 425 is a new combination testing system for packages with one-way degassing valves that measures headspace carbon dioxide (CO2) in addition to oxygen (O2).
Machine Product Brief
| February 21, 2012

Non-invasive oxygen analyzer determines oxygen headspace and ingress in flexible and rigid packaging

Designed for pharma blisters, Mocon’s OpTech – O2 system is a non-invasive, non-destructive thermoformed blister package oxygen analyzer that uses an optical sensor that “fluoresces” or gives off light directly related to the amount of oxygen present.
Machine Product Brief
| November 18, 2011

Entry-level transmission rate units

Designed for food, beverage, pharmaceutical and other companies that need to verify the barrier properties of their packaging materials, Mocon is bundling two of its entry-level, stand alone, permeation units for easy entry into OTR and WVTR testing.
Machine Product Brief
| July 11, 2011

Fully-automated testing system for measuring bacterial aerobic plate count (APC)

Precise, same-day results are achieved by Mocon’s GreenLight™ 930, which provides an APC or total viable count (TVC) of a food sample’s microbial load by using a sensing assay or vial.
Machine Product Brief
| May 2, 2011

Testing for packages with 1-way degassing valves

Mocon’s MultiCheck™ 400 combination testing system for packages with 1-way degassing valves measures oxygen headspace, leak detection, and seal strength via the company’s new Valve Test Unit™ (VTU).
Controls Product Brief
| April 28, 2011

Combination testing system

MultiCheck™ 400 from Mocon tests packages with one-way degassing valves, measuring oxygen headspace, leak detection, and seal strength. 
Machine Product Brief
| August 7, 2010

WVTR testing unit

Mocon's PERMATRAN-W® Model 3/33 Plus water vapor transmission rate (WVTR) testing unit provides automatic relative humidity (RH) capability via a new software interface.
Mocon_Microanalytics
Machine Product Brief
| May 2, 2010

Industrial odors identifier

Microanalytics™, a subsidiary of MOCON, Inc., has developed AromaTrax® which can identify the source of industrial odors and can help guide strategies for neutralizing them.  
Materials Product Brief
| March 8, 2010

Food/package life cycle testing

MOCON’s Advanced Packaging Solutions is designed as a one-stop approach for the analysis of food, beverages, pharmaceuticals, etc., and related packaging from raw material to transport to shelf life.
Mocon
Machine Product Brief
| December 7, 2009

O2 analyzer

Optech™ O2 Platinum analyzer from Mocon uses platinum fluorescent material to measure oxygen (O2) transmission rates and offers ‘film cells’ for flexible material testing.
Machine Product Brief
| October 23, 2009

Mocon's CAL-SMART® calibration system helps in-line gas stream analyser deliver accurate results

Accuracy, repeatability and durability are the key attributes of MOCON, Inc.’s oxygen GSA™ (gas stream analyzer) Model 102.
[CustomContent/LeadGenCampaign/SupplierSubmitted]
Machine Product Brief
| October 5, 2009

Calibration system for equipment with continuous gas flushing

System applies to food and pharmaceutical applications where carbon dioxide or nitrogen is flushed into the package to displace oxygen to extend shelf life.
Machine Product Brief
| October 28, 2008

Oxygen permeation analyzer

Mocon’s OX-TRAN® Model 1/50 oxygen transmission rate (OTR) analyzer is designed for simple installation and includes an absolute coulometric method, built-in software to minimize user error, and automatic relative humidity controls.
Machine Product Brief
| January 25, 2008

Packaging test systems

MOCON’s Lippke™ 4000 Series is the next generation in a line of positive pressure medical device packaging test systems.
Machine Product Brief
| October 23, 2007

Gas stream analyzer

NEW FROM PACK EXPO LAS VEGAS: Mocon’s oxygen gas stream analyzer, the GSA Model 102, is one-third the size of other commercially-available gas flush analyzers, and weighs one-tenth less, making installation on new units or retrofitting on existing form-fill-seal equipment simple.
Machine Product Brief
| May 8, 2007

Gas analyzer

Baseline-Mocon’s new BevAlert™ Model 8900 gas chromatograph analyzer monitors trace impurities in CO2 while offering improved testing sensitivity across a wider range of gases and eliminating the need for multiple instruments.
Machine Product Brief
| April 8, 2007

Gas analyzer

Baseline-Mocon’s new BevAlert™ Model 8900 gas chromatograph analyzer monitors trace impurities in CO2 while offering improved testing sensitivity across a wider range of gases and eliminating the need for multiple instruments.
Machine Product Brief
| April 5, 2007

Gas analyzer

Baseline-Mocon’s new BevAlert™ Model 8900 gas chromatograph analyzer monitors trace impurities in CO2 while offering improved testing sensitivity across a wider range of gases and eliminating the need for multiple instruments.
Machine Product Brief
| December 18, 2006

Bench-top O2 analyzer

The Pac Check® Model 840 Package Integrity Test System is a bench-top version of Mocon's popular and portable Model 820 unit for measuring both residual headspace oxygen, as well as absolute package leak rate.
Machine Product Brief
| December 31, 2005

Integrity test system

The portable Pac Check® Model 820 Package Integrity Test System from Mocon measures both residual headspace oxygen, as well as package leak rate by calculating accurately the real leak rate of a package.
Machine Product Brief
| October 31, 2005

Hot tack tester

Mocon is the sole representative of the HTI-XS Hot Tack Tester from U.K.-based RDM Test Equipment Co. The unit measures strength of heat seal in vf/f/s applications, allowing the user to change the temperature and record results from multiple readings on the same graph.
Machine Product Brief
| July 31, 2005

Weighing/sorting system

Mocon, Inc.
Machine Product Brief
| March 31, 2005

Portable O2/CO2 analyzer

Mocon now offers the Pac Check® Model 325 hand-held oxygen and carbon dioxide analyzer for measuring controlled and/or modified atmospheres in food packages.
Machine Product Brief
| February 29, 2004

OTR measurement

Mocon launches a precise and efficient way to measure oxygen transmission rates with its new-generation Ox-Tran® Model 702 unit. The testing system features Mocon’s proprietary, high-accuracy Coulox® coulometric-type sensor for oxygen detection.
Machine Product Brief
| January 31, 2003

Simultaneous multiple sample WVTR tester

The Permatran-W[r] Model 700 WVTR (water vapor transmission rate) test system uses seven independent operated test cells to test up to 7 films or packages in any combination at the same time.
Materials Product Brief
| July 31, 1999

Permeability test system

Designed for quality assurance applications, the Permatran-W® Model 523 vapor permeability test system from MOCON (Minneapolis, MN) measures WVTR of materials such as coated paper, corrugated and film.
Machine Product Brief
| December 31, 1997

Gas stream analyzer

Mocon (Minneapolis, MN) has released a four-page brochure on its GSA Series of on-line gas stream analyzers for testing gas-flushed packages. The GSA Series consists of six models that can measure oxygen, carbon dioxide or both, continuously or intermittently.
Materials Product Brief
| May 31, 1996

Permeation gauges

Mocon (Minneapolis, MN) offers a complete line of instruments for measuring oxygen, water vapor, carbon dioxide and aroma transmission rates through barrier films and packages.
Controls Product Brief
| October 31, 1995

Off-line analyzers

Mocon's (Minneapolis, MN) new Pac Check(TM) Models 600 and 650 combination off-line analyzers measure oxygen and carbon dioxide headspace in rigid and flexible packages.
Materials Product Brief
| June 30, 1995

Permeation instruments

Modern Controls (Minneapolis, MN) has announced the Mocon® Aromatron Series of instruments designed to measure the permeability, solubility, diffusivity and precise transmission rate of organic vapors through films and packages.