Alert: Packaging World now enhanced for the iPad and iPhone. Watch a quick video preview
Supplier News
|

PEEK Super Air Nozzle Features Strong Non-Marring Blowoff

EXAIR’s new PEEK 3/8 NPT Super Air Nozzle™ has been engineered to produce the highest performance attainable. The protective aerodynamic slots guide the airflow to a single point of convergence for hard-hitting force and dramatic noise reduction over typical blowoffs.
[CustomContent/LeadGenCampaign/SupplierSubmitted]
Supplier News
|

Large Super Air Nozzle Resists Corrosion And High Temperature

EXAIR's new 1 NPT Stainless Steel Super Air Nozzle™ delivers 6.6 pounds of strong blowing force for blowoff, cooling and drying applications located in corrosive, high temperature, food and pharmaceutical environments. Because the force is more than 8 times that of ordinary air nozzles, it is ideal for blowing heavy materials and where the air nozzle can’t be mounted close to the target surface.
[CustomContent/LeadGenCampaign/SupplierSubmitted]
Supplier News
|

Small NEMA 12 Cabinet Coolers Resist Heat And Dirt

EXAIR's new small NEMA 12 Cabinet Cooler® Systems keep electrical enclosures cool with 20°F (-7°C) air while resisting heat and dirty environments that could adversely affect the internal components. This durable Cabinet Cooler system provides a low cost, easy to install, maintenance free solution for enclosures in hot, remote and/or dirty environments. The cooling capacity of up to 275 Btu/hr. is ideal for small electrical enclosures with problematic overheating. Models with higher cooling capacities are available.
[CustomContent/LeadGenCampaign/SupplierSubmitted]
Supplier News
|

Heavy Duty HEPA Vacuum For 110 Gallon Drums

EXAIR’s new 110 Gallon Heavy Duty HEPA Vac is a powerful, HEPA quality, industrial vacuum cleaner. The higher capacity drum means that fewer drum changes will be required during clean-up. The Heavy Duty HEPA Vac is designed to move more material with less wear. It has been engineered to filter contaminants to HEPA requirements in dusty environments requiring frequent cleaning.
[CustomContent/LeadGenCampaign/SupplierSubmitted]
Supplier News
|

Premium Reversible Drum Vacuums Available

EXAIR's Premium Reversible Drum Vac™ System comes complete with a 30, 55 or 110 gallon drum, ready to use for your specific application. Its high powered vacuum fills a 55 gallon drum in less than two minutes. Then with the simple turn of a knob, the same stainless steel pump quickly empties the drum. The Reversible Drum Vac is compressed air powered and attaches to the included drum. It is extremely quiet at 86 dBA, making it suitable for a wide variety of applications. There are no motors or impellers to clog or wear out. It is covered by a five year warranty. The Premium Reversible Drum Vac System comes complete with a two-way pump assembly, shutoff valve, 10' (3m) static resistant hose, 20' (6m) compressed air hose, heavy duty tools, spill recovery kit, toolholder (most systems), drum dolly and 30, 55 or 110 gallon drum with lock ring and lid. For more information contact: EXAIR Corporation 11510 Goldcoast Dr. Cincinnati, OH 45249-1621 Phone: (800) 903-9247 Fax: (513) 671-3363 E-mail: [email protected] www.exair.com/52/premdv.htm http://www.exair.com/52/WatchReversibleDrumVac.htm
[CustomContent/LeadGenCampaign/SupplierSubmitted]
Supplier News
|

Long Ionizing Bars Eliminate Static Cling

EXAIR’s new Long Ionizing Bars are now available to eliminate static electricity on paper, film and plastics that are up to 96″ (2438mm) wide. Static electricity can attract dust and foreign materials, ruin product appearance, produce tearing or jamming and zap personnel. The profile of the electrically powered Ionizing Bar is compact, allowing it to fit in the confined spaces of machinery, where the static charge is generated. A high concentration of positive and negative ions produce fast static decay, neutralizing any surface within 2″ (51mm) of the bar. The long length of the Ionizing Bars allows them to be used across large production lines. The unique design of the shockless Ionizing Bar offers improved performance and reliability in industrial applications. Life expectancy has been extended by insertion molding the stainless steel ion emitters into a durable plastic. The ability to eliminate static can be greatly improved when attaching a Super Air Knife to the Ionizing Bar. The Super Ion Air Knife delivers more ions and is effective from a greater distance which is ideal for high speed, high charge applications. Air delivery can also remove dust and clean the product surface. For more information contact: EXAIR Corporation 11510 Goldcoast Dr. Cincinnati, OH 45249-1621 Phone: (800) 903-9247 Fax: (513) 671-3363 E-mail: [email protected] www.exair.com/52/lib.htm http://www.exair.com/52/WatchStaticEliminators.htm
[CustomContent/LeadGenCampaign/SupplierSubmitted]
Supplier News
|

New High Power Flat Air Nozzle Saves Space and Money

EXAIR's new 1" High Power Flat Super Air Nozzle produces a flat 1" (25mm) wide airstream with a strong blowing force of 16 ounces (462g) when mounted 12" (305mm) from the target. The unique design of this super-efficient nozzle makes it an ideal fit for both tight spaces and tight budgets. The 1" High Power Flat Super Air Nozzle uses EXAIR's patented technology to maximize entrained airflow while reducing noise levels. A precise amount of air is released through the 0.025" (0.64mm) air gap opening that is set with a stainless steel shim positioned between the body and removable cap. The airstream pulls in surrounding room air to produce a wide, forceful stream of high velocity, laminar airflow. Air consumption is 17.5 SCFM (495 SLPM) at 80 PSIG. The 82 dBA sound level is below the limits of the OSHA maximum allowable noise exposure standard 29 CFR 1910.95(a). Force and flow may be easily adjusted by installing different shim thicknesses. Optional swivel fittings and Stay Set Flexible Hoses to aim the nozzle are also available. The 1" High Power Flat Super Air Nozzle is available in zinc aluminum alloy construction, suitable for rugged industrial applications. Applications include ejecting heavy parts and slugs, chip removal, part cleaning, drying, liquid blowoff and cooling. For more information contact: EXAIR Corporation 11510 Goldcoast Dr. Cincinnati, OH 45249-1621 Phone: (800) 903-9247 Fax: (513) 671-3363 E-mail: [email protected] www.exair.com/52/1hpsan.htm http://www.exair.com/52/WatchAirNozzles.htm
[CustomContent/LeadGenCampaign/SupplierSubmitted]
Supplier News
|

Atto Super Air Nozzle For Precise Blowoff

EXAIR’s new Atto Super Air Nozzle™ has been engineered to produce the highest performance attainable from a tiny nozzle. It delivers the smallest, most precise blowoff with an efficient, high volume, high velocity airflow. The overall length of the air nozzle measures only 0.50" (12.7mm) with a diameter of only 0.16" (4mm), permitting installation in tight spaces. The durable Type 316 stainless steel construction is suitable for blowoff, cooling and drying applications located in general industrial, high temperature, food, pharmaceutical, semiconductor or corrosive environments. The Model 1108SS Atto Super Air Nozzle provides a narrowly focused air pattern. High amplification of airflow and a strong blowing force of 2.0 ounces (56.7 grams) are achieved with minimal air consumption of 2.5 SCFM at 80 PSIG. Safe operation is assured since the airflow of the Atto Super Air Nozzle cannot be blocked, which meets the OSHA standard for dead-end pressure 29 CFR 1910.242(b). Sound level is very low at 58 dBA and meets OSHA noise requirement 29 CFR 1910.95(a), as well as being CE compliant. The Atto Super Air Nozzle is designed to easily replace existing wasteful nozzles or open pipes. The compressed air inlet is male M4 X 0.5. For more information, contact: EXAIR Corporation 11510 Goldcoast Dr. Cincinnati, OH 45249-1621 Phone: (800) 903-9247 Fax: (513) 671-3363 E-mail: [email protected] www.exair.com/52/attosan.htm http://www.exair.com/52/WatchAirNozzles.htm
[CustomContent/LeadGenCampaign/SupplierSubmitted]
Supplier News
|

Chip Vac Is Now CE Compliant

Independent laboratory tests now certify that EXAIR’s Chip Vac™ meets the rigorous safety, health, and environmental standards of the European Union that are required to attain the CE mark. Chip Vac™ offers a fast, effective way to pick up chips and other debris and deliver them to a 5, 30, 55 or 110 gallon drum. The Chip Vac can be easily moved from drum to drum to keep different materials separate for recycling.
[CustomContent/LeadGenCampaign/SupplierSubmitted]
Supplier News
|

New Powerful Stainless Steel Flat Air Nozzle Saves Space, Saves Money and Resists Corrosion

EXAIR's new 1" Stainless Steel Flat Super Air Nozzle™ produces a flat 1" (25mm) wide airstream with a strong blowing force of 9.8 ounces (278g) when mounted 12" (305mm) from the target.
[CustomContent/LeadGenCampaign/SupplierSubmitted]
PEEK Atto Super Air Nozzle Features Precise Non-Marring Blowoff
Supplier News
|

PEEK Atto Super Air Nozzle Features Precise Non-Marring Blowoff

EXAIR’s new PEEK Atto Super Air Nozzle™ has been engineered to produce the highest performance attainable from a tiny nozzle. It delivers the smallest, most precise blowoff with an efficient, high volume, high velocity airflow.
[CustomContent/LeadGenCampaign/SupplierSubmitted]
Chip Trappers Are Now CE Compliant
Supplier News
|

Chip Trappers Are Now CE Compliant

Independent laboratory tests now certify that EXAIR’s Chip Trapper™ meets the rigorous safety, health, and environmental standards of the European Union that are required to attain the CE mark.
[CustomContent/LeadGenCampaign/SupplierSubmitted]
External Mix Spray Nozzles for Pressure Fed Applications
Supplier News
|

External Mix Spray Nozzles for Pressure Fed Applications

EXAIR’s new external mix spray nozzles atomize fluids in a range of spray patterns for a wide variety of uses. External mix nozzles are great where a high volume of liquid is needed. They can be used on liquids with a viscosity up to 800cp.
[CustomContent/LeadGenCampaign/SupplierSubmitted]
New Heavy Duty HEPA Vacuum Available
Supplier News
|

New Heavy Duty HEPA Vacuum Available

EXAIR’s new Heavy Duty HEPA Vac attaches to an ordinary 55 gallon open top drum to turn it into a powerful, HEPA quality, industrial vacuum cleaner.
[CustomContent/LeadGenCampaign/SupplierSubmitted]
Deluxe Super Ion Air Knife Kits Available
Supplier News
|

Deluxe Super Ion Air Knife Kits Available

EXAIR's Deluxe Super Ion Air Knife Kits are now available. These deluxe kits come with everything you will need to neutralize static electricity while blowing away dust and particulates from printed surfaces, paper, plastics and three dimensional shapes up to 96" (2438mm) across.
[CustomContent/LeadGenCampaign/SupplierSubmitted]
Premium Chip Vacuums Available
Supplier News
|

Premium Chip Vacuums Available

EXAIR's new Premium Chip Vac™ System comes complete with a 30, 55 or 110 gallon drum, ready to use for your specific application. The Chip Vac is used to clean chips or other dry materials from fixtures, floors and work surfaces of machining centers, lathes, saws, mills and other industrial equipment.
[CustomContent/LeadGenCampaign/SupplierSubmitted]
Dual High Temperature Cabinet Cooler® Systems For Large Enclosures
Supplier News
|

Dual High Temperature Cabinet Cooler® Systems For Large Enclosures

EXAIR's new Dual High Temperature Cabinet Cooler® Systems purge and cool overheated electrical control panels in harsh environments up to 200°F (93°C). Cabinet Coolers keep electrical enclosures cool with air as cool as 20°F (-7°C) air to eliminate high temperature malfunctions and protect sensitive electronics from hot, dirty locations, such as foundries, glass plants or steel mills.
[CustomContent/LeadGenCampaign/SupplierSubmitted]
Safety Air Guns with Chip Shields Protect Operators
Supplier News
|

Safety Air Guns with Chip Shields Protect Operators

EXAIR’s family of Safety Air Guns (Precision Safety Air Gun, Soft Grip Safety Air Gun, and Heavy Duty Safety Air Gun) has always provided high quality performance for your blowoff, drying or cleaning needs.
[CustomContent/LeadGenCampaign/SupplierSubmitted]
CE Compliant Air Nozzles Increase Efficiency And Decrease Overhead
Supplier News
|

CE Compliant Air Nozzles Increase Efficiency And Decrease Overhead

EXAIR’s family of Air Nozzles -- from the tiny new Model 1108SS Atto Super Air Nozzle at 2.0 ounces (56.7 grams) of blowing force to the high power Model 1120 Large Super Air Nozzle at 23 pounds (10.4 kg) of strong blowoff force -- have always provided safe, economical performance.
[CustomContent/LeadGenCampaign/SupplierSubmitted]
USB Data Logger Available for Digital Flowmeter
Supplier News
|

USB Data Logger Available for Digital Flowmeter

EXAIR’s Digital Flowmeter provides an excellent way to monitor compressed air consumption and waste. Now, with the addition of EXAIR’s new USB Data Logger, you can also maintain a history of the Digital Flowmeter’s measurements for analysis.
[CustomContent/LeadGenCampaign/SupplierSubmitted]
CE Compliant Air Amplifier Assures Safe, High Volume Air Flow
Supplier News
|

CE Compliant Air Amplifier Assures Safe, High Volume Air Flow

EXAIR’s Super Air Amplifiers and Adjustable Air Amplifiers have always provided a fast, quiet, efficient way to move large volumes of air for the transport of smoke, fumes, or light materials as well as for venting, cooling, drying and cleaning.
[CustomContent/LeadGenCampaign/SupplierSubmitted]
Siphon Fed Spray Nozzles for Non-Pressurized Applications
Supplier News
|

Siphon Fed Spray Nozzles for Non-Pressurized Applications

EXAIR's new siphon fed spray nozzles atomize fluids in a range of spray patterns for a wide variety of uses. Siphon fed atomizing nozzles require no liquid pressure and can be used with gravity fed liquids or lift liquids from a siphon height as much as 36 inches (91cm).
[CustomContent/LeadGenCampaign/SupplierSubmitted]
110 Gallon Chip Vac Available For Big Jobs
Supplier News
|

110 Gallon Chip Vac Available For Big Jobs

EXAIR’s new 110 Gallon Chip Vac™ System offers a fast, easy way to clean chips or other dry materials from fixtures, floors and work surfaces of machining centers, lathes, saws, mills and other industrial equipment.
[CustomContent/LeadGenCampaign/SupplierSubmitted]
Heat Eliminating Cold Gun Is Now CE Compliant
Supplier News
|

Heat Eliminating Cold Gun Is Now CE Compliant

In addition to producing a cold, quiet stream of air to reduce heat buildup on machining operations, EXAIR’s Cold Gun Aircoolant System™ has also met the rigorous safety, health, and environmental standards of the European Union in order to attain the CE mark.
[CustomContent/LeadGenCampaign/SupplierSubmitted]
Newly Revamped Blowoff Guide Offers Selection, Savings, and Safety
Supplier News
|

Newly Revamped Blowoff Guide Offers Selection, Savings, and Safety

EXAIR's updated Blowoff Guide helps you pick out the proper Air Nozzle and Safety Air Gun to get your job done right. Did you know that a single typical open pipe blowoff on your production line could be costing you more than USD $1,800 per year?
[CustomContent/LeadGenCampaign/SupplierSubmitted]
Pico Super Air Nozzle For Precision Blowoff
Supplier News
|

Pico Super Air Nozzle For Precision Blowoff

EXAIR’s new Pico Super Air Nozzle™, at only 5mm in diameter, is one of the smallest available, providing precision blowoff with a directed high volume, high velocity airflow.
[CustomContent/LeadGenCampaign/SupplierSubmitted]
Static Eliminator Neutralizes And Cleans Wide Surfaces
Supplier News
|

Static Eliminator Neutralizes And Cleans Wide Surfaces

EXAIR’s new 54" Super Ion Air Knife neutralizes static electricity while blowing away dust and particulates from printed surfaces, paper, plastics and three dimensional shapes.
[CustomContent/LeadGenCampaign/SupplierSubmitted]
New Powerful Flat Air Nozzle Saves Space and Money
Supplier News
|

New Powerful Flat Air Nozzle Saves Space and Money

EXAIR's new 1" Flat Super Air Nozzle produces a flat 1" (25mm) wide airstream with a strong blowing force of 9.8 ounces (278g) when mounted 12" (305mm) from the target. The unique design of this super-efficient nozzle makes it an ideal fit for both tight spaces and tight budgets.
[CustomContent/LeadGenCampaign/SupplierSubmitted]
Heavy Duty Dry Vacuum For 110 Gallon Drums
Supplier News
|

Heavy Duty Dry Vacuum For 110 Gallon Drums

EXAIR’s new 110 Gallon Premium Heavy Duty Dry Vac™ System is a rugged, industrial duty vacuum cleaner that has been engineered to rapidly vacuum high volumes of dry material. The higher capacity drum means that fewer drum changes will be required during clean-up. Because this compressed air powered vacuum has no motors or impellors to clog or wear out, it is ideal for the clean-up of abrasive materials like steel shot, garnet, metal chips, and sand, yet can also be used for general purpose applications.
[CustomContent/LeadGenCampaign/SupplierSubmitted]
Dual 316 Stainless Steel Cabinet Coolers Resist Heat And Corrosion
Supplier News
|

Dual 316 Stainless Steel Cabinet Coolers Resist Heat And Corrosion

EXAIR's new Dual 316 Stainless Steel Cabinet Cooler® Systems keep electrical enclosures cool with 20°F (-7°C) air while resisting heat and corrosion that could adversely affect the internal components. The wear, corrosion, and oxidation resistance of Type 316 stainless steel assures long life and maintenance free operation. The high cooling capacity of up to 5,600 Btu/hr. is ideal for large electrical enclosures and high heat loads. Models with lower cooling capacities for NEMA 12, 4 and 4X enclosures are also available.
[CustomContent/LeadGenCampaign/SupplierSubmitted]
Catalog 26 Offers Even More Intelligent Compressed Air Solutions
Supplier News
|

Catalog 26 Offers Even More Intelligent Compressed Air Solutions

EXAIR's new Catalog 26 is our best offering yet; a full color technical guide offering solutions to common industrial cooling, drying, conveying, blowoff, cleaning, coating, and static electricity problems. This expanded 168 page catalog features many new products that can help companies conserve compressed air and reduce dangerous noise levels.
[CustomContent/LeadGenCampaign/SupplierSubmitted]