Machine Product Brief
| December 8, 2009

Induction cap sealer

Enercon’s Super Seal™ Touch induction cap inspection system provides increased sealing speed, an intuitively designed touch screen interface, simplified set-up and operation, and capabilities for internal monitoring and remote network communications.
Machine Product Brief
| November 20, 2009

New Induction Sealing whitepaper teaches packagers how to "Achieve a Perfect Seal"

Enercon Industries has released a new induction sealing whitepaper called "Achieving a Perfect Seal" which educates packagers on the best practices for successful induction sealing.
[CustomContent/LeadGenCampaign/SupplierSubmitted]
Machine Product Brief
| October 5, 2009

New induction cap sealer with reengineered cap inspection system

Enercon Industries introduces its Super Seal™ Touch induction cap sealing system in operation at Booth C-2934.
Machine Product Brief
| April 6, 2009

Variable sealing controls

Enercon variable sealing control (VSC) technology helps overcome line speed limitations by automatically adjusting sealing energy to compensate for line speed fluctuations.
Machine Product Brief
| April 1, 2009

Induction cap sealer system

Enercon's Super Seal™ Deluxe cap sealer system features microprocessor control, operator interface and advanced sealing head design to maximize performance.
Machine Product Brief
| January 31, 2006

Surface treater

Enercon introduces the Dyne-A-Mite IT surface treater, which improves adhesion for conductive and non-conductive surfaces, providing a safe and effective means of cleaning surfaces and raising surface energy to promote the adhering and bonding of a variety of materials.
Machine Product Brief
| September 30, 2004

Capless sealing

Enercon offers both rotary and indexing capless sealing systems, ideal for efficiently sealing containers without caps, or prior to lidding or overcapping. Due to advancements in coil design, these systems can now seal round, non-round, square, rectangular, oblong, metal, glass, and plastic containers.
Materials Product Brief
| September 30, 2004

Long-lasting coating treatment

Enercon offers its Plasma3™ long-lasting treatment technology that improves hydrophilicity and precise surface coating performance, company says. System treats a range of substrates and can be customized to fit most production lines.
Controls Product Brief
| April 30, 2004

Surface treatment resource

A resource chart that concisely details the differences between corona, atmospheric plasma, and flame treatment technologies is available from Enercon.
Machine Product Brief
| January 31, 2004

Ultracompact induction sealing

Enercon introduces a new generation of ultracompact induction sealing power supplies. When matched with the company’s sealing heads, these new power supplies allow packagers to take advantage of the benefits of induction sealing for new applications, company says.
Machine Product Brief
| October 31, 2003

Seal inspection

Enercon offers the ESP monitoring device to assist packagers in determining the performance and consistency of their induction sealing system. Unit measures and quantifies the performance or effectiveness of the induction field produced by a cap sealer.
Materials Product Brief
| December 31, 2002

Surface treater

Dyne-A-Mite™ surface treater improves adhesive properties for high-quality printing on 3D plastic packs. Especially suitable for the medical and electronics industry.
Machine Product Brief
| October 31, 2002

Plasma treating system

Enercon (Monomonee Falls, WI) offers Plasma3™ technology that enhances the surface energy and treatment longevity of the most challenging substrates.
Machine Product Brief
| September 30, 2002

Cap liner sealer

Super Seal Deluxe™ from Enercon Industries (Menomonee Falls, WI) has a new “all-in-one” seal head for quick changeover. Induction-seals liners to a wide range of containers with advanced microprocessor control and operator interface.
Machine Product Brief
| December 31, 2001

Equipment: Improved cap sealer

The Super Seal™ series of waterless induction cap sealers from Enercon (Menomonee Falls, WI) now features microprocessor control and “plug-in” sealing heads.
Machine Product Brief
| October 31, 2001

Sealing system

Enercon’s (Menomonee Falls, WI) Super Seal™ Deluxe sealing system features microprocessor control and an advanced sealing head design to maximize performance.
Machine Product Brief
| July 31, 2001

Container rejection system

The e-jector container rejection system from Enercon (Menomonee Falls, WI) connects into Enercon’s cap inspection systems and mounts to any conveyor.
Machine Product Brief
| June 30, 2001

Cap-sealing systems

Enercon Industries’ (Menomonee Falls, WI) line of manual and semi-automatic cap-sealing systems includes Compak Jr., Auto Jr., and Pneumatic Jr.
Controls Product Brief
| January 31, 2001

Validation program

Enercon (Menomonee Falls, WI) is offering a new service to its cap sealing customers to assist them in meeting their validation requirements. Well-suited for pharmaceutical packaging operations.
Controls Product Brief
| August 31, 2000

Induction cap sealing system

Super Seal Max™ Induction Cap Sealing System from Enercon Industries (Menomonee Falls, WI) incorporates the use of an extended sealing head to increase dwell time, thereby increasing sealing capabilities.
Materials Product Brief
| July 31, 2000

Wide mouth sealer

When the new Ultra-Wide Coil is attached to Enercon’s (Menomonee Falls, WI) Compak Jr. induction cap sealer, the unit can seal 155 mm to 165 mm (6.1” to 6 ½”) openings, like those often found on bulk containers.
Materials Product Brief
| June 30, 2000

Induction cap sealer

The Super Seal 150™ from Enercon (Menomonee Falls, WI) is an air-cooled induction cap-sealing system with an extended sealing head that prolongs dwell time.
Machine Product Brief
| June 30, 1999

Induction cap sealer

Enercon Industries (Menomonee Falls, WI) has introduced its new stainless-steel-enclosed, air-cooled, induction cap sealer. The Super Seal(TM) models 75 and 100 are designed to operate without water cooling on filling/packaging lines in the pharmaceutical, nutrition supplement, and health and beauty aids industries.
Materials Product Brief
| April 30, 1999

Induction sealer

The versatile Compak(TM) cap sealer from Enercon (Menomonee Falls, WI) ordinarily uses air-cooled technology, operating at 100'/min. When higher production speeds are required (up to 200'/min), the unit can be converted to water cooling.
Controls Product Brief
| March 31, 1999

Induction sealing control system

The Assists 2000 is a new, PLC-based induction sealing control system from Enercon Industries (Menomonee Falls, WI). The system's capabilities provide four operating and control modes, hold five preset product menus (including set power level, coil height, eject delay, eject time and stalled bottle delay), provide a critical fault monitor and a series of help menus.
Machine Product Brief
| October 31, 1998

Air-cooled sealer

The air-cooled Super Seal(TM)50 from Enercon (Menomonee Falls, WI) operates without water-cooling on packaging lines in the pharmaceutical, nutrition supplement, and health and beauty aids industries.
Controls Product Brief
| September 30, 1998

Coil design change

The updated Compak(TM) Jr. from Enercon (Menomonee Falls, WI) offers a newly designed hand-held sealing coil said to be ergonomically correct for the operator.
Materials Product Brief
| June 30, 1998

Induction sealer

The new Auto Jr. from Enercon Industries (Menomonee Falls, WI) is a semi-automatic induction sealer suitable for low-volume or test-facility applications.
Machine Product Brief
| May 31, 1998

Counterbalanced mount

Enercon's (Menomonee Falls, WI) redesigned, quick-set, adjustable mount has been designed for use with Integral II Induction Sealing Systems.
Controls Product Brief
| September 30, 1997

UV/water-based inks

A seminar on UV-cured and water-based inks explores the advantages and disadvantages of the inks and determines their importance to various applications.
Controls Product Brief
| August 31, 1997

Surface treater

The Two-Headed Dyne-A-Mite(TM) Plasma Surface Treater from Enercon (Menomonee Falls, WI) has been redesigned for improved adhesion on bottles or other molded containers.
Machine Product Brief
| July 31, 1997

Portable sealer

Enercon (Menomonee Falls, WI) will debut a semi-automatic portable induction sealer at the show. The sealer is designed to cycle when a bottle is placed into it, and automatically shuts off once the sealing cycle is completed.
Controls Product Brief
| January 31, 1997

Packaging web sites

The stampede onto the Internet by the packaging community shows no signs of slowing. A variety of information can be gleaned from these sites, many of which offer immediate, technical information.
Machine Product Brief
| December 31, 1996

Induction sealing on untreated glass

Enercon Industries (Menomonee Falls, WI) has developed new waxless foils that enable untreated glass jars to be induction sealed at high speeds. Previously, glass containers had to be treated in order to accept a foil inner seal.
Machine Product Brief
| November 30, 1996

Cap inspection system

A new cap inspection system monitors potential faults in a packaging line and ensures ideal sealing conditions, says manufacturer Enercon (Menomonee Falls, WI).
Controls Product Brief
| February 29, 1996

Induction cap sealing system

Enercon Industries Corp. (Menomonee Falls, WI) offers a two-page, four-color flyer describing the new Compak(TM) Jr. Induction Cap Sealing System.
Controls Product Brief
| October 31, 1995

Induction cap sealer

Enercon Industries (Menomonee Falls, WI) has introduced the Compak(TM) Jr, a self-contained induction cap sealing system. It measures 7" x 12" x 14" and weighs under 20 lb.
Materials Product Brief
| June 30, 1995

Induction sealing system

The 4kW Integral II induction sealing system from Enercon (Menomonee Falls, WI) is capable of sealing closure sizes from 20 to 120 mm at speeds over 100 ft/min.
Controls Product Brief
| March 31, 1995

Cap sealer

The Red-e-System from Enercon (Menomonee Falls, WI) is an economical heat sealing system for caps. Available with 1 or 2 kW power. Power supply and water recirculator are prewired and self-contained.
Materials Product Brief
| February 28, 1995

Remote cap sealing system

Enercon's (Menomonee Falls, WI) Integral II remote cap sealing system gives operators system control independent of the main power supply. This allows placement of controls convenient to operators.
Materials Product Brief
| January 31, 1995

Sealing head

The "1" flat sealing head from Enercon (Menomonee Falls, WI) seals 20- through 120-mm cap foil innerseals. Handles continuous-thread as well as child-resistant caps using magnetic energy to align them proper-ly.