Controls Product Brief
|

CTC Parker Automation: PC control card

Designed for small- and mid-size machine control on a PCI card is the new MachineLogic™ Slot Card Runtime control card from CTC Parker Automation (Milford, OH).
Controls Product Brief
|

CTC Parker Automation: Windows HMI bundle

InteractX is a Windows-embedded human-machine interface (HMI) from CTC Parker Automation (Milford, OH) that includes both hardware and software. Designed specifically for machine builders, InteractX combines the performance and advanced graphics of high-end HMI products with the low cost and ease of integration associated with bundled hardware/software HMI solutions.
Controls Product Brief
|

CTC Parker Automation: PC-based I/O

CTC Parker Automation (Milford, OH) has added a new Ethernet buscoupler to its MachinePoint™ line of remote I/O. The module utilizes Modbus TCP/IP for data transmission at 10/100 Mbps between control and machine components.
Controls Product Brief
|

CTC Parker Automation: PC interface

CTC Parker Automation (Milford, OH) combined I/O with PC software and hardware to develop MachinePoint™ I/O software. Software features up to 6 expansion I/O modules that can be connected to a base buscoupler, providing a maximum of 64 input/64 output bytes.
Controls Product Brief
|

CTC Parker Automation: Machine control software

CTC Parker Automation (Milford, OH) has developed an updated version of MachineShop™ software for developing HMI and machine control applications. Version 1.01 features more than 20 new enhancements, including a configurable memory model that can double the program and system memory.
Controls Product Brief
|

CTC Parker Automation: Product brochure

CTC Parker’s (Milford, OH) brochure describes its full line of PowerStation and Industrial PC hardware solutions. The PowerStation family includes a 6” panel replacer as well as a 15” high-performance PC and can be bundled with CTC’s MachineShop suite of controls software.
Controls Product Brief
|

CTC Parker Automation: Distributed I/O

CTC Parker Automation (Milford, OH) now offers distributed I/O for its line of PC-based controls. CTC is now licensed to sell I/O products from Wieland Electric (Bamberg, Germany).
Controls Product Brief
|

CTC Parker Automation: Ethernet driver

CTC Parker Automation’s (Milford, OH) Allen-Bradley Ethernet Driver allows use of its Interact HMI software for Ethernet communications to Allen-Bradley SLC-5 and PLC-5 controllers on the factory floor.
Controls Product Brief
|

CTC Parker Automation: Industrial workstation

CTC-Parker Automation’s (Milford, OH) industrially hardened PC9 workstations support SCADA, networking and enterprise demands. Available with Celeron Pentium II processors, long-life 12” or 15” flat-panel touchscreen monitor and 32X CD-ROM drive.
Controls Product Brief
|

CTC Parker Automation: Hybrid control white paper

A new white paper from CTC Parker Automation (Milford, OH) describes the concept of the PC-based logic controller, or “PCLC,” a hybrid controller said to combine the best attributes of both PLCs and PC-based controls.
Controls Product Brief
|

CTC Parker Automation: PC-based control

CTC Parker Automation (Milford, OH) offers MachineShop™ development software. Said to save time and cost in creating applications around CTC’s new PC-based MachineLogic™ control and Interact HMI software.
Controls Product Brief
|

CTC Parker Automation: Industry's first PCLC

MachineLogic™ PC Logic Controller (PCLC), from CTC Parker Automation (Milford, OH), combines PC-based open design with the reliability and cost-effectiveness of PLCs.
Controls Product Brief
|

CTC Parker Automation: PC-based HMI control

PowerPanel(TM) from CTC Parker Automation (Milford, OH) is a PC-based control and HMI solution for OEM machine builders. The flat-panel monitor and remote PC box are bundled with CTC's Interact HMI software.
Controls Product Brief
|

CTC Parker Automation: Control software

CTC Parker Automation (Milford, OH) has introduced its PC-based control package called Machine Logic(TM), which will be a part of CTC's new Machine Shop Suite of software for factory floor automation.
Controls Product Brief
|

CTC Parker Automation: Simplified changeover

CTC Parker Automation (Milford, OH) has introduced the Machine Configuration Module(TM) (MCM) option for its human-machine interface software. Designed specifically for discrete operations like packaging, MCM benefits include faster changeover for end-users and more rapid development of modular configurations for OEMs meeting unique customer requirements.