Controls Product Brief
| February 28, 2005

Vacuum Pumps

ANVER VR Series Vacuum Pumps run on 72 psi compressed air and can be easily integrated into any type of vacuum cup mounting arrangement for providing suction at the load pick-up point.
[CustomContent/LeadGenCampaign/SupplierSubmitted]
Controls Product Brief
| February 28, 2005

Miniature Venturi Vacuum Pumps

ANVER VR Series Mini Vacuum Pumps run on 80 psi compressed air to create a 24” (61 mm) Hg vacuum at the cup with only 0.42 to 1.27 SCFM (11.9 to 36 l/min.) air flow, depending upon model.
[CustomContent/LeadGenCampaign/SupplierSubmitted]
Controls Product Brief
| February 28, 2005

Vacuum Suction Cups

ANVER Push-In Valve Vacuum Cup Assemblies feature Delrin® probes that protrude slightly from the center and touch an object first to open the vacuum flow; providing instant attach and release.
[CustomContent/LeadGenCampaign/SupplierSubmitted]
Controls Product Brief
| February 28, 2005

Suction Cups and Suspensions

ANVER OC Series Oval Vacuum Cups, snap-on fittings, and suspensions are designed to retain their position and will not rotate for applications where product alignment is critical.
[CustomContent/LeadGenCampaign/SupplierSubmitted]
Machine Product Brief
| February 28, 2005

Vacuum Tube Lifter

The ANVER VT-250 Vacuum Tube Lifter is compatible with any overhead crane system and provides a 100% continuous duty cycle for stacking and unstacking pallets.
[CustomContent/LeadGenCampaign/SupplierSubmitted]
Machine Product Brief
| February 28, 2005

Vacuum Tube Lifters

ANVER Mini VT Series Vacuum Tube Lifters are easy to learn and simple to operate for loading and unloading pallets without manual lifting, bending, and stretching.
[CustomContent/LeadGenCampaign/SupplierSubmitted]
Machine Product Brief
| February 28, 2005

Bottle Pick-Up Heads

ANVER Bottling heads can grip virtually any type of bottle from the neck using an internal rubber bladder which expands to grab it, eliminating mechanical devices that can crush or cause damage.
[CustomContent/LeadGenCampaign/SupplierSubmitted]
Machine Product Brief
| February 28, 2005

Ergonomic Vacuum-Hoist Lifting System

The ANVER VM-Series Integrated Ergonomic Vacuum-Hoist Lifting System retains its position without drift when the up/down controls are released, allowing a single operator to stop and pack or unpack equipment into boxes.
[CustomContent/LeadGenCampaign/SupplierSubmitted]
Machine Product Brief
| August 31, 2002

Mini suction cups

Vacuum and suction cups from Anver Corp. (Hudson, MA) are offered in more than 40 standard versions in sizes ranging from .03” to 3.74” (3-mm to 95-mm) dia.
Machine Product Brief
| October 31, 2001

Vacuum tube lifter

Anver VT Series Vacuum Tube Lifting System eliminates manual lifting by grabbing, lifting, and lowering loads using a single operator control on the handle.
Controls Product Brief
| September 30, 2000

Bottle pick-up heads

New line of bottle pick-up heads from Anver (Hudson, MA) use a compressed internal air bladder to grip the neck of a bottle safely and then release it using a vacuum.
Controls Product Brief
| September 30, 1999

Mini vacuum generators

Anver Corp.'s (Hudson, MA) new line of miniature venturi vacuum generators mount on the end effector, provide instant pick-up and release, require minimum air flow, and are suitable for applications where space is limited.
Controls Product Brief
| June 30, 1999

Vacuum cups

The Anver (Hudson, MA) SSR series vacuum cups feature an aluminum pad with a machined double-wall groove and a rubber sealing ring that snaps into place by hand.
Controls Product Brief
| May 31, 1997

Vacuum cups

A new line of vacuum cups molded from natural gum rubber is now available from Anver (Hudson, MA). Available in standard or custom compounds, cups resist paper dust and ink and are offered in standard push-, stretch-, clip- and screw-on mounting styles.