EXAIR’s Cold Gun Aircoolant System™ makes it possible to replace messy mist systems and improve dry machining operations using clean, cold air! It’s a new solution to an old problem. Heat build up on dry machining operations reduces tool life and machining rates. The CE compliant Cold Gun Aircoolant System produces a stream of clean, cold air at 50°F (28°C) below supply air temperature. Operation is quiet and there are no moving parts to wear out. It will remove heat to prolong tool life and increase productivity on machining operations when liquid coolants cannot be used.
E-BOOK SPECIAL REPORT
42 Best Package Designs
Sign up to receive timely updates from our editors and download this e-book consisting of our editors' picks of most notable package designs. Updated for 2014!
A new technology solution to the old problem of static build-up. EXAIR Static Eliminators maximize ionized airflow while minimizing compressed air consumption. A small amount of compressed air is used to entrain a high volume of surrounding air. This combined stream is ionized by an emitter point (or points) and delivered to the charged surface. Static is neutralized from distances up to 20 feet (6.1m) away. Thus, EXAIR Static Eliminators work effectively in spite of obstructions, three dimensional configurations, web "rippling", etc.
EXAIR's Super Air Knife™ is a quiet, hard-hitting curtain of air for blowoff, cleaning, drying, and cooling, dramatically reducing compressed air usage and noise when compared to other blowoffs. The Super Air Knife offers a more efficient way to clean, dry or cool parts, webs or conveyors. It delivers a uniform sheet of laminar airflow across the entire length with hard-hitting force. Even at high pressures of 80 PSIG (5.5 BAR), the sound level is surprisingly quiet at 69 dBA for most applications! See the CE compliant Super Air Knife in action!
The patented Chip Trapper™ offers a fast, easy way to clean chips, swarf and shavings out of used coolants and other liquids. The Chip Trapper vacuums the coolant or liquid that is filled with debris and traps all the solids in a reusable filter bag. Only the liquid pumps back out. The CE compliant Chip Trapper is ideal for use on machines with sumps, parts washers, tanks and storage containers of contaminated liquids.
EXAIR Cabinet Cooler® Systems are a low cost, reliable way to cool and purge electronic control panels. EXAIR Cabinet Coolers incorporate a vortex tube to produce cold air from compressed air - with no moving parts. The compact Cabinet Cooler can be installed in minutes through a standard electrical knockout. NEMA 12, 4 and 4X Cabinet Coolers that match the NEMA rating of the enclosure are available in many cooling capacities for large and small control panels. They are the only compressed air powered coolers that are CE compliant. Available in 316 Stainless Steel also.
EXAIR's engineered Air Nozzles and Safety Air Guns reduce noise levels and air costs. "Go Green" by upgrading your blowoff, cooling, and drying operations to award winning Super Air Nozzles. EXAIR's engineered Air Nozzles are a simple solution to reduce excessive air consumption and noise levels on compressed air blowoff operations. Air savings, compared to open copper tubes or pipes commonly used for blowoff, can be as high as 80%. Safety Air Guns use engineered air nozzles for high performance. Watch our video to see these CE compliant Air Nozzles and Safety Air Guns in action!
EXAIR’s new PEEK Atto Super Air Nozzle™ has been engineered to produce the highest performance attainable from a tiny nozzle. It delivers the smallest, most precise blowoff with an efficient, high volume, high velocity airflow.
At just 7.2mm (0.28346”) in diameter, and based on Nemicon’s successful line of 18mm (0.70866”) and 12mm (0.47244”) diameter miniature encoders, the 7S Series shaft type encoder features high resolution, high noise immunity and high reliability.